LED help
#1
LED help
i just got my leds to day and started working on the heater panel got them wired up as trepaul86 has on his post. went to make sure the led would lite up some of them did and some of them didnt. starting moving some wires around and they got bright and would go back to the way they were before...not sure if i wired them up right...is thier any other way to wire them up???
#7
#8
The colors on the resistor tell you what size they are.
Leds are polarized. Long leg is positive, and the base of the led has a flat spot for negative.
Im not really sure on what your doing with your leds. Mine were direct replacements. Plugged them in to the stock bulb holders. Worked well.
There is a hot spot in the middle and the red shows up as purple.
Leds are polarized. Long leg is positive, and the base of the led has a flat spot for negative.
Im not really sure on what your doing with your leds. Mine were direct replacements. Plugged them in to the stock bulb holders. Worked well.
There is a hot spot in the middle and the red shows up as purple.
#10
#12
#13
#14
#22