I was wondering, do you find the Stick to be too far forward and a little low ?
I did, maybe our height is different but I changed to another Hurst Stick, p/n: 5388022
It bends back more and is taller than the one that came with the kit and it bends closer to the driver’s side. Then I didn’t like that position so I made a 2” x 2” x ¼” Plate and moved the stick up an inch and back an inch; ALMOST perfect. No pic on it.
Waiting for a Shorty Cntr Console before moving it again.
Just thinking and looking at your pics and thought how short the original stick was.
4x4, 5sp, Std Cab, Stepside, E4 Red
4” Lift - Coil-Overs, 6” SkyJacker Leafs - No Blocks (Mistake)
31 Spline FX4 Rear Axle, 4.56s and OX Locker, Hurst Shifter w/Optional Stick and "Made by Grev" alignment adapter