What colour should I paint it?
#51
#58
What are you looking for?
http://www.carpartswholesale.com/
I'd try and get a hold of them to see what they can do for a price on the Stainless Steel overlay like mine for your HVAC.
Or you could get one of the APC white face ones off eBay.
Or a silver Sport HVAC out of an Expo... Most likely off eBay.
http://www.carpartswholesale.com/
I'd try and get a hold of them to see what they can do for a price on the Stainless Steel overlay like mine for your HVAC.
Or you could get one of the APC white face ones off eBay.
Or a silver Sport HVAC out of an Expo... Most likely off eBay.
#69
Could look pretty cool depending on how it's applied. I used that Metalcast to red out my tail lights, but I used the ground coat Metalcast on my bezel before applying the red.
Are you talking about trying to make it change colours or something? They have that Mystify paint. That stuff is pretty cool.
Used it on my old Contour. Green/purple. Kinda crappy dark pic though.
Flash went off in this one.
Are you talking about trying to make it change colours or something? They have that Mystify paint. That stuff is pretty cool.
Used it on my old Contour. Green/purple. Kinda crappy dark pic though.
Flash went off in this one.
#70
Could look pretty cool depending on how it's applied. I used that Metalcast to red out my tail lights, but I used the ground coat Metalcast on my bezel before applying the red.
Are you talking about trying to make it change colours or something? They have that Mystify paint. That stuff is pretty cool.
Are you talking about trying to make it change colours or something? They have that Mystify paint. That stuff is pretty cool.
#73
Because I had to repaint it, I ended up removing all of the paint right down to the bare plastic. I sanded the entire bezel and cleaned it up as good as I could and then I layed down the Metalcast Ground Coat. I let that dry and then wetsanded it to get out some of the little bumps and crap that were in the paint. I did about 3 coats of Ground Coat, wetsanding each one to make it smooth. After I applied the colour and the clear, I did not sand any of it and it came out really nice and shiny as you can see.
#74