Best bet would be to test fit them.
I had a set of Explorer Seats and swapped them for Ranger Buckets with extended cab tracks.
I swapped the tracks from the standard cab seats to the ext cab seats but again they were Rangers seats and they bolted in.
The ext cab tracks are longer as the Explorer Seat Tracks so my thought the tracks will need rework to fit.
Even in an Ext Cab Ranger the Explorer Seat Tracks need to have some rework on the rear bolt locations, opening up the holes.
Here is some posting on track swapping.
Upgraded seats to Mountaineer Leather/power
4x4, 5sp, Std Cab, Stepside, E4 Red
4” Lift - Coil-Overs, 6” SkyJacker Leafs - No Blocks (Mistake)
31 Spline FX4 Rear Axle, 4.56s and OX Locker, Hurst Shifter w/Optional Stick and "Made by Grev" alignment adapter
Last edited by Scrambler82; 04-05-2013 at 04:04 AM.