Conversation Between biketheozarks and drppdyllwrngr

as long as there aren't air bag sensors in the seat, you can add heaters to them. they are a thin pad that goes on top of the foam, and under the cover. very easy to install. you can get a pair off ebay for around $75.

I have a question about heated seats. Is it possible to make just about any seats into heated seats, or do you have to start out with with them being heated? If it is possible to make your own, could you do a how-to thread about this?

i am planning to convert mine to the mustang auto floor shifter. not sure how it's going to work yet, but that's the plan.

good luck with the sunvisors. i tried using a set, but never had any luck with them. ended up with the explorer dual visors.

if you are planning this swap, here are the "requirements". power windows are a must. if you have crank windows, the handle will hit the dash. manual trans or convert an auto to floor shift. the column shifter will hit the dash. custom door panels. stock ranger door panels will hit the dash. a pillars have to be reshaped to fit. custom hvac. my ranger box won't fit, nor would a mustang box. plan to run a vintage air unit$$$$$. lots of rewiring to make things work. i plan to run the mustang gauge cluster, so i will have to wire it.

I would really like so see some pictures of your cobra interior swap. I have an '06 ranger ext cab as well as a wrecked '98 mustang gt that has the same interior as your swap. My mustand interior is in excellent condition. I have already robbed the sun visors, dome light, and rear view mirror out of it (the rear view mirror was originally out of a convertable, it has map lights in it.