More lift w/ same tires??
#1
More lift w/ same tires??
Been thinking of getting a 3" body lift but I'm afraid the tires will look too small. I just got these tires and I'm not willing to deal with trying to swap them or anything.
I'm currently running 33x12.5x15 with fabtech spindles.
So do you think I could go 3 more inches with the same tires, or will it look bad?
Thanks
-Levino
I'm currently running 33x12.5x15 with fabtech spindles.
So do you think I could go 3 more inches with the same tires, or will it look bad?
Thanks
-Levino
#3
eh , they might look a little dwarf'd...
buy the body lift now and wait to put it on until you need new tires, that way there's just the cost of the new tires way down the road, and if you decide not to go up later, you'll have no problem reselling the body lift here for pretty much what you payed
buy the body lift now and wait to put it on until you need new tires, that way there's just the cost of the new tires way down the road, and if you decide not to go up later, you'll have no problem reselling the body lift here for pretty much what you payed
#10
Originally Posted by nated0g
on another note how is your winch secured? front hitch or custom job?
I custom mounted the winch myself. The page is kind of old, but here is a brief write-up on it:
http://www.cardomain.com/ride/474024/2
Originally Posted by rangererv
Why not just buy new tires?
I would have lifted it when I needed new tires but I didn't have the time to do it so I settled on just the tires and said I would lift it when they wore out.....well I'm getting a bit antsy and I'm thinking on lifting it during spring break (three weeks away)
-Levino
#13
a311fanam, I gotta give you props for doing that on Paint...well done.
I think it will look good! As I've said many times before, I hate a crowded fender well (not to say yours is crowded) but I'd much rather see a lot of lift with smaller tires than trying to cram huge tires on little or no lift.
I think it will look good! As I've said many times before, I hate a crowded fender well (not to say yours is crowded) but I'd much rather see a lot of lift with smaller tires than trying to cram huge tires on little or no lift.
#16
I think I'm gonna go ahead and do it....under one condition, I bring my grades my these next few weeks. I'm a hard *** on myself.....
and a311fanam, that is a good job with paint. That's the right scale too for a 3" lift,
I figure given one week of nothing to do I can do the lift and take care of the front end all at the same time; meaning either a custom bumper or remounting the guard and winch...we'll see.
-Levino
and a311fanam, that is a good job with paint. That's the right scale too for a 3" lift,
I figure given one week of nothing to do I can do the lift and take care of the front end all at the same time; meaning either a custom bumper or remounting the guard and winch...we'll see.
-Levino
Thread
Thread Starter
Forum
Replies
Last Post
01 ranger 4x4
Suspension Tech
30
03-26-2009 11:28 PM