need some ideas!
#1
need some ideas!
so here is my 94 ranger. i need to think of what to do with it. im so indecisive and everything and would like some project for over the summer. gotta have a plan for my truck or ill get bored with it and i dont like getting bored. heres some pics. its 2wd, 4.0, pretty much stock. been thinking about putting explorer axles with 3.73's maybe. idk
just throw anything at me. i could use some ideas
just throw anything at me. i could use some ideas
#2
Old Guy User…
iTrader: (12)
Look for 4.10 gears (not many out there) and it will wake up the 4.0.
I like 2x’s in the air some but that is just me.
Look at the interior, change up the Dash Lighting to LEd and the color to match your expectations.
Bucket seats are quick and east, Explorer Seat low or high back some are powered but they usually only need two wires. Mounting them is the only real challenge.
Luck, take your time - do it right the first time.
I like 2x’s in the air some but that is just me.
Look at the interior, change up the Dash Lighting to LEd and the color to match your expectations.
Bucket seats are quick and east, Explorer Seat low or high back some are powered but they usually only need two wires. Mounting them is the only real challenge.
Luck, take your time - do it right the first time.
#3
yay someone once addvice! haha first: i would just take the pen strip off cuzz it would look a lot better. and then you can do some of the easies and do some mods to like your lights and what not and depending on what you want to do and whats money is in it buy like a system for your truck or atleast a head unit and install that
#5
Old Guy User…
iTrader: (12)
I am not a fan of the Rhino Liner but if it what you want then do it, there is a paint called Stone Guard that can be any color that works too.
Buckets are everywhere so look for a good set, if you were closer to me a have three pairs for sale.
The Full length Consoles take time to get out and reinstall but for some well worth it, I like the shorty consoles with the in-line cup holders.
When doing the seats check the mount spacing on the bottom of the seat not the floor mounting, then when picking out seat see if you can get a set of Explorer or Ranger Seats that have the same pattern and all should almost bolt in.
More of the 1st gen rangers came with buckets so keep your eyes open. what Ex Seats will fit I do not know sorry.
The Cluster LEDs are time consuming but nice touch to an interior, read the how to’s and see what is involved.
Good Luck on the project and as siad already, “Do It Right The First Time” !
Buckets are everywhere so look for a good set, if you were closer to me a have three pairs for sale.
The Full length Consoles take time to get out and reinstall but for some well worth it, I like the shorty consoles with the in-line cup holders.
When doing the seats check the mount spacing on the bottom of the seat not the floor mounting, then when picking out seat see if you can get a set of Explorer or Ranger Seats that have the same pattern and all should almost bolt in.
More of the 1st gen rangers came with buckets so keep your eyes open. what Ex Seats will fit I do not know sorry.
The Cluster LEDs are time consuming but nice touch to an interior, read the how to’s and see what is involved.
Good Luck on the project and as siad already, “Do It Right The First Time” !
#6
#7
#8
Thread
Thread Starter
Forum
Replies
Last Post