new type of fog light mod
#1
new type of fog light mod
About a week ago someone in the forums posted a thread on how they took their round factory fog lights, opened them up and removed the "shroud" that surrounds the bulb, making it a "flood" light.
Well, yesterday, i opened my fog lights up, removed the shroud and WOW! instead of light going way out to the sides of the road, it is all concentrated on the road in front of the truck!
Thank you to whoever made the original "how to" of this mod. It works great and your instructions were flawless!
Well, yesterday, i opened my fog lights up, removed the shroud and WOW! instead of light going way out to the sides of the road, it is all concentrated on the road in front of the truck!
Thank you to whoever made the original "how to" of this mod. It works great and your instructions were flawless!
#3
#6
why do you say the light output is retarded? it's concentrated in front of the truck NOT LIGHTING UP the ditch 25 feet away from the truck.
#9
sorry, i currently don't have a camera.
But it's real easy to do: Theres 3 very small screws on the inside area of the back of the fog light. (2 on the top, 1 on the bottom) remove those screws and the inside of the fog light tilts or "swings" downward, opening it up. Also, there are 2 tabs that you may need a small flat screwdriver to slightly pry apart (CAREFULLY) to get the housing to open up where the shroud is connected to the inner reflector. There is a small screw, remove that screw and the shroud will come out.
But it's real easy to do: Theres 3 very small screws on the inside area of the back of the fog light. (2 on the top, 1 on the bottom) remove those screws and the inside of the fog light tilts or "swings" downward, opening it up. Also, there are 2 tabs that you may need a small flat screwdriver to slightly pry apart (CAREFULLY) to get the housing to open up where the shroud is connected to the inner reflector. There is a small screw, remove that screw and the shroud will come out.
#10
#13
#15
#18