Trigger01's '86 Project Thread
#1
08-20-2009
Trigger01's '86 Project Thread
Figured I'd make a progress thread for the '86 so I didn't have 20 different threads.
I'll just quote my first two threads.
Last Friday night:
Getting towed home(My friends '99 F-350 PSD)
'86 like to tailgate:
A few of the extra wheels and tires I have laying around(I also have my old American Racing wheels a and a stock spare tire in the sub-basement):
After wiping all the mold and mildew off the exterior:
Planned to get a lot more done Saturday, but the truck had wasps nests all over it and I got stung and I'm allergic so I ended up talking Benedryl and sleeping all day.
Tuesday night:
Replace the neg. batt. cable and the battery tried starting the truck and didn't succeed, but I expected that. Also took the valve cover off and ordered a new seal and plugs and wires.
As it sits in the garage now:
There are quite a few new parts sitting on the left side of the picture in all that mess, and a few of them are old parts off the '01.
That's it for tonight boys and girls. I'll be working on it all day Saturday so more updates then.
I'll just quote my first two threads.
Well as the title says i bought a new truck today. It's a 1986 Ford Ranger Carb'd 2.0 4cyl. with a manual transmission. Needs a bit of work, but I hope to have it up and running in no time. Right now it's not getting spark so I bought some parts tonight and I will start working on it this weekend. I will bring it home on Friday. I need new tires and it needs a real good cleaning. It's been sitting for a few years, but my friend had it running about a month ago. Enough of the babel, on with the pics!
I got the title to my new '86 last night and got it swapped over today and in less than an hour later I was modifying it. I upgraded to 15" wheels like the 14" wheels that were on it. I got them from a friend that used to have a 4wd Ranger. Had new tires put on the 15's. The are 205/75/15's, stock for that truck is 185/75/15. It had 205's on it, but they were all in worse shape than I originally thought. I'm bring it home tomorrow. Expect more pics. tomorrow.
Before:
Believe it or not there is 7 wheels and tires in there(1 full size spare for the red truck, 2 225's on deer hove wheels, and 4 new ones for the '86).
After:
While I was laying under the truck today I realized how much nicer it is to work under a lifted truck than a lower truck.
Center caps will go back on after I paint/clean up the wheels. How about that red interior fellas? You know you like it!
Before:
Believe it or not there is 7 wheels and tires in there(1 full size spare for the red truck, 2 225's on deer hove wheels, and 4 new ones for the '86).
After:
While I was laying under the truck today I realized how much nicer it is to work under a lifted truck than a lower truck.
Center caps will go back on after I paint/clean up the wheels. How about that red interior fellas? You know you like it!
Getting towed home(My friends '99 F-350 PSD)
'86 like to tailgate:
A few of the extra wheels and tires I have laying around(I also have my old American Racing wheels a and a stock spare tire in the sub-basement):
After wiping all the mold and mildew off the exterior:
Planned to get a lot more done Saturday, but the truck had wasps nests all over it and I got stung and I'm allergic so I ended up talking Benedryl and sleeping all day.
Tuesday night:
Replace the neg. batt. cable and the battery tried starting the truck and didn't succeed, but I expected that. Also took the valve cover off and ordered a new seal and plugs and wires.
As it sits in the garage now:
There are quite a few new parts sitting on the left side of the picture in all that mess, and a few of them are old parts off the '01.
That's it for tonight boys and girls. I'll be working on it all day Saturday so more updates then.
#3
08-20-2009
#5
08-20-2009
#7
08-20-2009
#8
08-21-2009
#10
08-21-2009
#11
08-22-2009
Join Date: Jul 2005
Location: El Paso, Texas
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
#13
08-23-2009
There is no hole. It's just surface rust. I plan to sand and paint the roof at some point. That's low on the priority list though.
#14
08-23-2009
Join Date: Oct 2004
Location: ***
Posts: 2,099
Likes: 0
Received 0 Likes
on
0 Posts
#15
08-24-2009
Best update I can give yall as of now. I took more stuff apart on Saturday, but didn't get very far It was nice being able to take the hood off by myself, it's a lot lighter than my '01. If I get anxious tonight I may finish taking out the distributor, otherwise it'll be tomorrow. Picture as of now:
#16
08-24-2009
#17
08-24-2009
Thanks to the help of RF, I got the distributor out, took me less than a minute. I'll put the new one in tomorrow. I was really itching to see how hard it was going to be to get out.
https://www.ranger-forums.com/forum2...stributor.html
https://www.ranger-forums.com/forum2...stributor.html
#18
08-25-2009
#20
08-25-2009
#22
08-27-2009
#23
08-29-2009
I got the distributor in today. Third on I bought and it didn't fit either. So i sanded it down. It was off by 3000ths of an inch. I got the cap and rotor on too and did a few other things and had to go back to the parts house and never got around to working on the truck again so that's where it's at.
#25
08-29-2009
Nah, I don't have it back together yet. I have to clean out the spark plug holes, there's oil in two of them I have to replace the valve cover seal and change the brain, plugs and wires and a hose and put a hose elbow back on. Oh, I need to change the oil too.
