My brother's new project I Have to help
#1
Join Date: May 2009
Location: centralcity, KY
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
My litlle brother's new project I am helping
Its an '88 f-150 with a 302 fuel injected, 4wd just needed new water pump. He wants ito make it a daily driver and a weekend warrior. we were working on the water pump the other day and found out that some of the bolts were broke off in the timing chain housing so we are in the process of getting a new timing chain housing. I no once we get it runnig he wants to put a 6" lift on it and some 35's other mods are pending, tell me what you think, and if you have any ideas please tell. better pics to come
Last edited by billet03; 07-01-2009 at 11:14 PM.
#5
Join Date: May 2009
Location: centralcity, KY
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
ran into a problem with the water pump install, the previouse oner broke the bolts off in the block behind the timing chain housing, so we were going to just thread the housing but it broke, stupid idea i know, so any way, we have to get a new one, put a new window in the passenger side door, I forgot to take pics, will post some soon
#6
#8
ran into a problem with the water pump install, the previouse oner broke the bolts off in the block behind the timing chain housing, so we were going to just thread the housing but it broke, stupid idea i know, so any way, we have to get a new one, put a new window in the passenger side door, I forgot to take pics, will post some soon
#9
Join Date: May 2009
Location: centralcity, KY
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
#10
Join Date: May 2009
Location: centralcity, KY
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
#11
Join Date: May 2009
Location: centralcity, KY
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
#12
Join Date: May 2009
Location: centralcity, KY
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
#13
Join Date: May 2009
Location: centralcity, KY
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
well since I've been laid off I have done some work to my brothers truck, cleaned out the oil pan put new gaskets on it, and ran into another problem, one of the bolts were broke off in the block so I got to get a welder or something to weld a nut to it and take it out, I'll put some pics on here later
--- see it right there.--^
--- see it right there.--^
Last edited by billet03; 10-24-2009 at 06:11 PM.
#16
Join Date: May 2009
Location: centralcity, KY
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
here are some more pics, of the truck and other stuff I've done so far.
the truck. I put a new oilpan gasket on the other day and also cleaned the block some with a wire brush, that's the reason for the flowery sheet. lol
that's right only 82,341.
twin sticks. lol
rear end pic very rusty/dirty lol
transfer case, pretty decent shape. needs a seal. looks like.
today I took off the front bumper to straighten it out, and clean up the rust.
primered, waiting on my brother to buy the black paint. lol.
well that's it for today.
the truck. I put a new oilpan gasket on the other day and also cleaned the block some with a wire brush, that's the reason for the flowery sheet. lol
that's right only 82,341.
twin sticks. lol
rear end pic very rusty/dirty lol
transfer case, pretty decent shape. needs a seal. looks like.
today I took off the front bumper to straighten it out, and clean up the rust.
primered, waiting on my brother to buy the black paint. lol.
well that's it for today.
Last edited by billet03; 10-24-2009 at 06:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Dweano
General Ford Ranger Discussion
1
01-22-2011 01:31 PM
Fx4wannabe01
Suspension Tech
17
01-28-2008 07:08 AM