Originally Posted by Paul Spickard
sweet build you got some some talent in fab work out does anything ive seen or done at the machine shop I work at, SUBSCRIBED!
thank you sir! I am having some stupid issues trying to get this 2.3 thats in the truck running.. when I bought the truck it ran but ran really rough and would not rev above 3500.... the other day I finally decided to try firing it up again and it fired up and ran rough then ran out of gas as i forgot to put fuel in the tank after removing it... I put fuel in it and installed a new fuel filter today then went to fire it up and now it wont fire... I pulled the front plug on the intake side to check for spark and there is none. so now I am trying to figure out weather whatever was going bad before causing it to run like crap just finally died or if I am now chasing a new problem? I am just trying to get this motor going for a trip to the dezert before summer is over and to race a local tuff truck event on the 25th so if it is something too major I will prolly just do a motor swap now and get it over with... any ideas on what could be going on? I have my scangauge 2 hooked up and there is no codes and it is getting water temp data so it seems to be communicating with the PCM however the MPG gauge on the scanner is reading something like 99999... I am just lost with this pile right now... if you have any ideas please feel free to throw them out there so hopefully I can get this thing up and running...