Swapped Rear End
#1
07-07-2007
Unregistered User
Posts: n/a
Swapped Rear End
#2
07-08-2007
#3
07-08-2007
Unregistered User
Posts: n/a
#7
07-08-2007
Join Date: Apr 2005
Location: Valrico, Fl 33594
Posts: 4,748
Likes: 0
Received 0 Likes
on
0 Posts
... the project logs section is for displaying progress and getting help on anywhere you might be stuck. It serves as a point of reference like a "How-To". Save the anecdotes of your setup for your signature or garage or something. No need to make a thread unless you showcase pics and let people know tips and tricks and any hardships you encountered.
EDIT: Glad to see some pics, now throw in some more text ! Tons of people including myself are always looking for reading material on swaping in a exploder rear end. tell me about the process you experienced
EDIT: Glad to see some pics, now throw in some more text ! Tons of people including myself are always looking for reading material on swaping in a exploder rear end. tell me about the process you experienced
#8
07-08-2007
Unregistered User
Posts: n/a
Some of the things I ran into on the swap.
1)I had to reverse the shock/axle mounting brackets so the shocks would mount up.You can not use the original axle mounting brackets due to the explorer axle is bigger.
2)The brake were pretty easy to swap and you should not need any additional stuff if you get the axle from disc to disc.We picked it up at a local pick a part for $120 and there is a $35 core charge.
3)The exsisting sway bar on the ranger mounted up pretty good for the most part.The axle from the explorer is a little beefier.
4)Make sure you fill the differential up first before installing it.It will speed the process up.I definitly wish I had known that.
5)When we picked up the axle from pick a part make sure to grab the shock mount.As seen in #1
1)I had to reverse the shock/axle mounting brackets so the shocks would mount up.You can not use the original axle mounting brackets due to the explorer axle is bigger.
2)The brake were pretty easy to swap and you should not need any additional stuff if you get the axle from disc to disc.We picked it up at a local pick a part for $120 and there is a $35 core charge.
3)The exsisting sway bar on the ranger mounted up pretty good for the most part.The axle from the explorer is a little beefier.
4)Make sure you fill the differential up first before installing it.It will speed the process up.I definitly wish I had known that.
5)When we picked up the axle from pick a part make sure to grab the shock mount.As seen in #1
#9
07-14-2007
Unregistered User
Posts: n/a
How Is The Swap Going?
How is the swap going? if you do not mind i have a few questions.
what size tires are you using, how did the gear ratio work out?
did your shocks work, or did you change them?
did you change the master cylinder for the brakes, how do they feel?
were the two rears the exact same with?
what size tires are you using, how did the gear ratio work out?
did your shocks work, or did you change them?
did you change the master cylinder for the brakes, how do they feel?
were the two rears the exact same with?
#10
08-05-2007
Unregistered User
Posts: n/a
Tires are 275/45/17's.The rear ends are not the same.Th explorer rear end is bigger in diameter.The shocks worked fine just need the mounting brackets off the explorer and reverse the sides they were mounted on.The brakes seem to work just fine.I dont know if it being a 4.0l they already used a bigger master cylinder?
Thread
Thread Starter
Forum
Replies
Last Post
stephen.g.fiddes
Drivetrain Tech
3
2 Weeks Ago 06:13 AM
stephen.g.fiddes
Drivetrain Tech
30
05-02-2010 06:57 PM
rubberupracer39
General Ford Ranger Discussion
15
07-12-2008 03:17 PM
