Today Dan came over and we installed his CB Radio, and put LED lights in his cluster.
Dan Figuring out the final mounting of the radio itself.
Running the Coax
Putting the console Back Together
We put this damn thing in and out about 5 times cause stuff kept getting caught, and we lost a socket down in the void of the Ranger Dash. (which we found after while out on the gravel roads.)
Dan taking the gauge apart so we could clean it.
LED Bulbs we were installing
While Dan was cleaning up behind his gauges, and putting the interior back together, I re-positioned the CB antenna to the side of the box so it could open all the way.
After we finished, we went out for a spin on the local gravel roads.
What I did not get a picture of was the external speaker position, and the final mounting position, due to some metal needing some extra persuasion that we did not have the tools for in the back end of my schools parking lot. I also do not have pictures of the Gauges. Dan should upload those later tonight.