just a little project for the ranger
#107
So I guess I should update this..got front calipers and pads today with all the hardware. Will order single passenger side high steer ARM soon so I can do crossover steering, once I have the ARM, I can mount the steering box, and make my draglink.
If I get the front brakes done tomorrow, ill post pics...
If I get the front brakes done tomorrow, ill post pics...
#112
I gain interest in this project and this **** happens...again.
Your Order is on hold due to a temporary back order. We apologize for any inconvenience this may cause and will be shipping your order as soon as the parts are available. Thank you for your business and patience.
Thank you for your order and for your patience in this matter.
The following is a summary of your order.
BRK-1057-8 Axle tube shock tabs
Axle tube diameter: 3.5"
Plate thickness: 1/4"
Price: $0.99
Qty: 2
SPA-565 Step Down Spacer 7/8" to 3/4" with 1/16" shoulder
Price: $5.99
Qty: 2
HSA-601-2 D60 high steer kit for kingpin axles
Kit type: Single Short Passenger Arm
Hole style: Chevy 3/4 ton TRE
Price: $147.99
Qty: 1
yes, the arm above will need to be drill for hiems, i can do that, im not paying an extra $15 for them to drill it out, **** that
Also ordered a whole bunch of brake parts from "russel" should be here this week !
Russell Performance Plumbing - An Edelbrock Company
A local place will be making my ps lines when i get to that point, then wheels tires and i can roll it off a cliff.
Your Order is on hold due to a temporary back order. We apologize for any inconvenience this may cause and will be shipping your order as soon as the parts are available. Thank you for your business and patience.
Thank you for your order and for your patience in this matter.
The following is a summary of your order.
BRK-1057-8 Axle tube shock tabs
Axle tube diameter: 3.5"
Plate thickness: 1/4"
Price: $0.99
Qty: 2
SPA-565 Step Down Spacer 7/8" to 3/4" with 1/16" shoulder
Price: $5.99
Qty: 2
HSA-601-2 D60 high steer kit for kingpin axles
Kit type: Single Short Passenger Arm
Hole style: Chevy 3/4 ton TRE
Price: $147.99
Qty: 1
yes, the arm above will need to be drill for hiems, i can do that, im not paying an extra $15 for them to drill it out, **** that
Also ordered a whole bunch of brake parts from "russel" should be here this week !
Russell Performance Plumbing - An Edelbrock Company
A local place will be making my ps lines when i get to that point, then wheels tires and i can roll it off a cliff.
#116
#120
#121
#123