Ianyboy build thread
#1
Ianyboy build thread
Here is my build-up for my 2011, Sport 4x4. From may 2011, to today!
It is a Sport 4x4, with all equipment and accesories of the FX4, including the 4.10 differentials
When I bought the truck, may 2011, brand spanking new:
After this, I got my DDIN Alpine INA-W900, in dash GPS radio.
After my break-in period, mid-summer 2011, got my 1.5'' spacers on it:
Truck stayed as is till summer 2012, where i got my old 31s:
Winter 2012-2013, the fun begins (I got a pay raise :P, it helped)
Got my 2.5 Inch suspension lift:
Got the 3in bodylift:
Summer 2013 gets to us.
Painted the fender flares, emblems in flat black:
Got the custom fab front bumper:
Got the muffler cut off of the truck:
Installed my hilift jack on the tailgate:
Winter 2013-2014:
Mounted my CB and it's 102in antenna: (its in the bootom left corner)
Got my cluster face painted in silver:
I'll now on give y'all regular updates as to what happens to the truck
It is a Sport 4x4, with all equipment and accesories of the FX4, including the 4.10 differentials
When I bought the truck, may 2011, brand spanking new:
After this, I got my DDIN Alpine INA-W900, in dash GPS radio.
After my break-in period, mid-summer 2011, got my 1.5'' spacers on it:
Truck stayed as is till summer 2012, where i got my old 31s:
Winter 2012-2013, the fun begins (I got a pay raise :P, it helped)
Got my 2.5 Inch suspension lift:
Got the 3in bodylift:
Summer 2013 gets to us.
Painted the fender flares, emblems in flat black:
Got the custom fab front bumper:
Got the muffler cut off of the truck:
Installed my hilift jack on the tailgate:
Winter 2013-2014:
Mounted my CB and it's 102in antenna: (its in the bootom left corner)
Got my cluster face painted in silver:
I'll now on give y'all regular updates as to what happens to the truck
Last edited by ianyboy; 04-10-2014 at 04:38 PM.
#3
#5
#8
I see I have not updated this since the tires! Well, where to start?!
Got an ugly @$$ camper shell for the baby stuff, soon will be painted black;
I smoked the red part of the tail lights, and the front corners, using some plasti-dip;
Built a beefier TC skid plate;
Went to a local U-Pull for a buddies '94 ranger, ended up finding myself a couple of goodies. An Expo OHC, and a lower console with 2 cup holders out of an Edge Ranger;
And, lastly, this past W-E, relocated my CB radio to top dash;
Got an ugly @$$ camper shell for the baby stuff, soon will be painted black;
I smoked the red part of the tail lights, and the front corners, using some plasti-dip;
Built a beefier TC skid plate;
Went to a local U-Pull for a buddies '94 ranger, ended up finding myself a couple of goodies. An Expo OHC, and a lower console with 2 cup holders out of an Edge Ranger;
And, lastly, this past W-E, relocated my CB radio to top dash;
#10
#11
#12
Not really part of build, but hey!
Well today had a show & shine, by Bf Goodrich in my area. Presented the Ranger amongst all the Jeeps; (BTW the Pano pic was before everone arrived)
Went on the RTI flex Ramp
Tires are 33'' tall @ 15psi
Suspension lift is 2.5'' total
Wheelbase was measured at 125.5''
Front wheel, 69''
Rear wheel, 89''
And here is the result sheet (yeah, its in french)
Well today had a show & shine, by Bf Goodrich in my area. Presented the Ranger amongst all the Jeeps; (BTW the Pano pic was before everone arrived)
Went on the RTI flex Ramp
Tires are 33'' tall @ 15psi
Suspension lift is 2.5'' total
Wheelbase was measured at 125.5''
Front wheel, 69''
Rear wheel, 89''
And here is the result sheet (yeah, its in french)
#13
#14
Thread
Thread Starter
Forum
Replies
Last Post
fletch12518
Fabrication & Tool Tech
21
07-05-2007 10:31 PM