Zabeards SAS Thread
#1
Zabeards SAS Thread
defiantly not Ranger parts! But these are going on the Ranger.
They are the Rubicon Express Long Arms, Rubicon Express Coils, Rubicon Express Upper Arms and their adjustable Track bar. (this stuff is really BEEFY i was surprised by the quality!)
I plan on making my own coil buckets and my own shock mounts from tube.
All i need now is a Yota steering box, should have it next week.
I choose these arms because they were adjustable and do not use the Heim Joint
Adjustable Track Bar
These are 5.5" TJ/XJ lift coils.
Yota Steering Shaft
Stainless Steel brakeline for Rear
Limited Slip Unit for 31 Spline
Spring Perches from Blue Torch Fab (beefy)
Misc 31 Spline Parts
Guess Where I am going tomorrow.
So there you are no more secrets!
What you think?
They are the Rubicon Express Long Arms, Rubicon Express Coils, Rubicon Express Upper Arms and their adjustable Track bar. (this stuff is really BEEFY i was surprised by the quality!)
I plan on making my own coil buckets and my own shock mounts from tube.
All i need now is a Yota steering box, should have it next week.
I choose these arms because they were adjustable and do not use the Heim Joint
Adjustable Track Bar
These are 5.5" TJ/XJ lift coils.
Yota Steering Shaft
Stainless Steel brakeline for Rear
Limited Slip Unit for 31 Spline
Spring Perches from Blue Torch Fab (beefy)
Misc 31 Spline Parts
Guess Where I am going tomorrow.
So there you are no more secrets!
What you think?
Last edited by zabeard; 11-06-2007 at 05:28 AM.
#2
#4
Originally Posted by HighRollerII
right on man..straight up pimpin..
nice bundle of parts..how much the LS unit for the 31 spliner set you back and whered you get it from?
nice bundle of parts..how much the LS unit for the 31 spliner set you back and whered you get it from?
I'm going to have an extra one because i made a mistake. I will ship it with the shackles if you want it. idk on a price yet.
#10
#15
#16
#18
#19
Originally Posted by Big04Ranger
hey zach if those are chevy shackles hold onto to them.. ill prob end up wantin them.. i have a feeling that just the 5.5" rear chevy leaf wont be enuff for me
i didnt know you needed any, Evan already claimed my extra set. We can figure something out though.
#20
Originally Posted by elmo_4_vt
What front axle are you using?
What rear do you need the perches for?
-
What rear do you need the perches for?
-
I have a 31 spline Explorer axle that i need the perches for.
I am using a D30 from a 96xj for now, but i have some dibs on a Waggy D44 that i will weld mounts for my control arms and just swap it on later.
The D30 i am pulling tomorrow is HP and is suppose to have D44 UJoints not CVs one the axles
#22
#23
Originally Posted by elmo_4_vt
How close is the width on the 96xj to the stock rear axle of our truck? I think I remember ours have a 59" drum face to drum face width?
It sure would make the initial swap much easier since the kit pieces are made for it...
-
It sure would make the initial swap much easier since the kit pieces are made for it...
-
i think it is around 60" so pretty close. I will measure Disc To Disc tomorrow and let you know.
i didnt buy the actual RE kit just pieces. Red Rock 4x4 sells RE stuff with free shipping. Saved over 100 on shipping.
#25