For Sale: stock and aftermarket yard sale - TX
#1
10-24-2010
stock and aftermarket yard sale - TX
So im pretty much gutting the interior of my ranger. as shown below, grey/black scheme - let me know what you want out of it. everything but the seats and steering wheel. if you want the rubber floor, i can do that too. just let me know. will put a price on what people ask for. too much to list. heres pics..
oh and its just dirty because its been sitting for the past few months. my shop has a dirt floor so every time i open it it gets dusty. everything is in great shape...
next on the list is my old superlift with rcd brackets and fox coilovers. comes with everything you see pictured. they were dirty and stuff so i cleaned them up with a wire wheel. thats why they look the way they do. its everything to lift the front. youll have to figure out something else for the back as i kept my rear setup. asking $1100
electric shift 1354 without the shift motor. everything works great. shift motor took a crap though. $75
351w long tube headers - $75
have two hubs. they are both from napa i think. ive gone through so many i cant even remembers. $15 a piece
stock d30 ring and pinion from a xj. high pinion. - $75
San Antonio Offroad
not sure if anyone wants this but i have my tcase skid plate i made a while back. its only been through like 2 or 3 wheelin trips. help up great. 1/4" plate all the way around. actually, i think the angled pieces are thicker. cant remember. bolts in with 1/2" bolts to the stock bolt holes in the frame. asking $40
custom front driveshaft - this was custom made by a driveshaft shop because the original owner didnt want to pay for the superlift driveshaft. its got a flange on the tcase side that uses the stock bolts to bolt to the 1354, slip in the shaft, and brand new ujoints. i ran it for almost two years and never had any problems. worked perfectly. sorry its dirty,. its been sitting in the corner of my garage for almost a year.i will clean it for the buyer though. haha. $250
buyer pays for shipping. thanks
oh and its just dirty because its been sitting for the past few months. my shop has a dirt floor so every time i open it it gets dusty. everything is in great shape...
next on the list is my old superlift with rcd brackets and fox coilovers. comes with everything you see pictured. they were dirty and stuff so i cleaned them up with a wire wheel. thats why they look the way they do. its everything to lift the front. youll have to figure out something else for the back as i kept my rear setup. asking $1100
electric shift 1354 without the shift motor. everything works great. shift motor took a crap though. $75
351w long tube headers - $75
have two hubs. they are both from napa i think. ive gone through so many i cant even remembers. $15 a piece
stock d30 ring and pinion from a xj. high pinion. - $75
San Antonio Offroad
not sure if anyone wants this but i have my tcase skid plate i made a while back. its only been through like 2 or 3 wheelin trips. help up great. 1/4" plate all the way around. actually, i think the angled pieces are thicker. cant remember. bolts in with 1/2" bolts to the stock bolt holes in the frame. asking $40
custom front driveshaft - this was custom made by a driveshaft shop because the original owner didnt want to pay for the superlift driveshaft. its got a flange on the tcase side that uses the stock bolts to bolt to the 1354, slip in the shaft, and brand new ujoints. i ran it for almost two years and never had any problems. worked perfectly. sorry its dirty,. its been sitting in the corner of my garage for almost a year.i will clean it for the buyer though. haha. $250
buyer pays for shipping. thanks
Last edited by shadow905; 10-25-2010 at 10:51 PM.
#4
10-25-2010
I WANT THE FLOORRRR!!!!!!!!!!!!!!!!! PLEASEEE :))))
lol how much you want for it? shipped to 70706.
Thanks :)
lol how much you want for it? shipped to 70706.
Thanks :)
Last edited by JRacer; 10-25-2010 at 11:35 AM.
#5
10-25-2010
Join Date: Aug 2006
Location: btwn the Buff and the Roc
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
#6
10-25-2010
seems like a good deal on the superlift....... ahhh!
is everything included to get the front parts on? or would the buyer need to get some random things here n there
is everything included to get the front parts on? or would the buyer need to get some random things here n there
#7
10-25-2010
Join Date: Oct 2010
Location: Morrisdale, PA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Did you sell the airbig switch cubby? I want it, if you didn't!
Also a price on the rubber floor if it isn't sold? Shipped to 16858
PM Me back! Thanks man
Also a price on the rubber floor if it isn't sold? Shipped to 16858
PM Me back! Thanks man
#8
10-25-2010
both are spoken for. however, i wont get to pull it for a few days so if those people back out when the time comes, youre next in line.
#10
10-25-2010
Join Date: Oct 2010
Location: Morrisdale, PA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
#11
10-25-2010
just the coilovers? or the whole lift? id rather not separate at the moment. maybe if someone doesnt jump on it for a while then we can talk.
#15
10-25-2010
i have no problem shipping. a buddy of mine gets the hookup on shipping heavy stuff like that too so just lemme know.
#18
10-25-2010
ok. just let me know. hopefully(fingers crossed) someone will buy it before then. need the money for some other truck stuff
#23
10-27-2010
Join Date: Oct 2010
Location: mobile al
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
#25
10-27-2010
ill make a deal to someone who wants the lift and the shaft. $1250 for the lift and shaft. shaft is balanced and has new ujoints. just something to chew on
