Looks great. I just did my S-10 work truck. Had enough to do almost 3 thin coats.
Just give it enough time to do some drying between coats.
An hour or so should do depending on temp and humidity.
A 5' handle attached to the roller also is a good idea so you don't have to climb up
into the bed while it's still wet/tacky.
Don't mean to jack this tread, but KOREY89 did a really great "how to" on this back in Oct.
I asked him how it was holding up a few weeks ago and he told me it was holding up fine.
As for cost. They offer 3 diff kinds of paint. With and without UV protection.
Both smooth and textured (Like the one shown) finish. They also offer it in about 12-15 colors.
Prices run $90 to $140 per gal. Plus $18.50 for shipping.
Total cost including brushes, masking tape, roller tray, etc. was about $140-150.
I got the $90 paint since this is a D/D work truck.
Here's a link to KOREY89's write up. http://www.ranger-forums.com/forum2/...-bedliner.html