New bumper and winch installed
#1
07-12-2009
Join Date: Jun 2006
Location: quebec canada
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
#2
07-12-2009
Join Date: Aug 2008
Location: BR, LA
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
#4
07-12-2009
Join Date: Jun 2008
Location: Jacksonville, FL
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
#7
07-12-2009
Join Date: Nov 2008
Location: Colorado
Posts: 1,829
Likes: 0
Received 0 Likes
on
0 Posts
#8
07-12-2009
Join Date: Nov 2008
Location: san jose, Costa Rica
Posts: 1,319
Likes: 0
Received 0 Likes
on
0 Posts
#10
07-12-2009
#11
07-12-2009
Join Date: Jan 2009
Location: Barrington, NH
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
#12
07-12-2009
Join Date: Jun 2006
Location: quebec canada
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Ive one other mod to do before the skid then they are going under, the only thing ive not yet figured was the gas tank has it really close to the driveshaft i dont have much room to work something out and the oem one scares me with how thin it is. Also i started working part time after work in a 4x4 modification shop so its pays the mod on the truck and leaves my real work paie in my account. Nearly have enought accumulated time to paie for the coil over in front, just need to find if i want 600lbs coil or 700 with all the stock i transport when going camping.
Made a mistake when i ordered the snorkel, should have order a 80 to 89 landcruiser one and i want with a 90 + so the lower section has a gap with the body but it going to be fix this winter, the hole in the fender wasnt fun to cut but everything else really want well. Made a three inch hole on the side of the air box going trow the inner fender then connected an 3 inch to 4 adaptor so i could use a 4 inch wood shop cleaner hose between the airbox and the snorkel.
Made a mistake when i ordered the snorkel, should have order a 80 to 89 landcruiser one and i want with a 90 + so the lower section has a gap with the body but it going to be fix this winter, the hole in the fender wasnt fun to cut but everything else really want well. Made a three inch hole on the side of the air box going trow the inner fender then connected an 3 inch to 4 adaptor so i could use a 4 inch wood shop cleaner hose between the airbox and the snorkel.
#15
07-12-2009
Join Date: Apr 2006
Location: Paulding , GA.
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
#17
07-12-2009
#19
07-13-2009
Join Date: Aug 2007
Location: Golden, CO
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
#23
07-13-2009
Join Date: Dec 2006
Location: Deltona, Fl.
Posts: 3,486
Likes: 0
Received 0 Likes
on
0 Posts
#24
07-13-2009
