Lights, camera, no action!
#1
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Likes: 0
Received 0 Likes
on
0 Posts
Lights, camera, no action!
Got some 06 corners put on, thanks Sniper, and finally got all my lights wired up correctly so they work off the foglight switch. All that's left to do is the foglight mod and bam!!
No longer useless.
Really digging the orange in the 06s.
No longer useless.
Really digging the orange in the 06s.
Last edited by seed60; 07-26-2009 at 04:00 PM.
#6
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Likes: 0
Received 0 Likes
on
0 Posts
Looks good. Did you ever get your fender fixed?
Matt go right back out there and do the fog light mod NOW. For 01-03's it takes two seconds to do lol.
#10
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Likes: 0
Received 0 Likes
on
0 Posts
Makes the foglights stay on with highbeams.
#14
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Likes: 0
Received 0 Likes
on
0 Posts
On a side note, they stopped working. I went out to aim the lights and take some night pics then the lights shut off after being on a couple minutes.
Not really sure what happened. The fuse still looks good, but it was really hot when I pulled it out, it's a 25A fuse.
Not sure how to check relays to see if they're good. The hella relay is 40A, but I'm not sure what the stock one is. I'm thinking it might be the problem, but I have no clue.
This is how I wired them using the hella wiring kit, 18 gauge wire, and a 25A fuse.
Any suggestions?
Last edited by seed60; 07-26-2009 at 06:35 PM.
#18
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Likes: 0
Received 0 Likes
on
0 Posts
#20
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Likes: 0
Received 0 Likes
on
0 Posts
Autozone and Advance told me they don't have the relay I need. Anybody know where else I might can find a higher rated relay?
#21
Member
iTrader: (5)
Join Date: May 2005
Location: Jackson, New Jersey
Posts: 4,872
Likes: 0
Received 0 Likes
on
0 Posts
Glad to see you found some corners that you like.
I'm not much of a help for the relay, but you can always wire up the fog light button directly to your hella relay for the lights. With a volt meter in hand, I imagine it wouldn't be too dificult at all - just remove the bezel, figure out which wire from the switch controls the Ford relay, cut that wire and run a new wire from there to the Hella relay.
I'm not much of a help for the relay, but you can always wire up the fog light button directly to your hella relay for the lights. With a volt meter in hand, I imagine it wouldn't be too dificult at all - just remove the bezel, figure out which wire from the switch controls the Ford relay, cut that wire and run a new wire from there to the Hella relay.
#22
Thread
Thread Starter
Forum
Replies
Last Post
sitton440
Snapshots
30
01-28-2009 02:51 PM