build timeline what do you think
#1
build photos, what do you think
ok guys here is the build pics of my ranger so far
what I started with 2 years ago
92 Extended cab 2.3l 5 speed
Never liked the 60/40 split modded seats and added explorer center console
made my own push button start
Made some custom wooden arm rests
I then found a 94 4.0l V-6 as a parts truck that i was gonna pull the engine on but then decided to pull the 92 parts and build up the 94 instead
Came with a fiberglass cowl scoop hood
And euro style tail lights
lifted the rear 1 1/2 inches at the wheel wells when I added a leaf from the 92
Got a set of 18" BIGG Wheels and 265/45zr18s Nexen N3000 from craigslist
(Still need to get taller sidewalls on the rear)
Added some 2"X3" driving lights behind the grill
Got a set of 06' bed rails
Explorer OHC and rear dome light added
torn down and sanded ready to start paint
Self etching primer sprayed and dry
first coat of paint applied
Painted hood with center cowl fade
Painted black trims and reassembled so I can drive to work
Still got alot of work to do but this is where I am at so far. what do you guys think?
what I started with 2 years ago
92 Extended cab 2.3l 5 speed
Never liked the 60/40 split modded seats and added explorer center console
made my own push button start
Made some custom wooden arm rests
I then found a 94 4.0l V-6 as a parts truck that i was gonna pull the engine on but then decided to pull the 92 parts and build up the 94 instead
Came with a fiberglass cowl scoop hood
And euro style tail lights
lifted the rear 1 1/2 inches at the wheel wells when I added a leaf from the 92
Got a set of 18" BIGG Wheels and 265/45zr18s Nexen N3000 from craigslist
(Still need to get taller sidewalls on the rear)
Added some 2"X3" driving lights behind the grill
Got a set of 06' bed rails
Explorer OHC and rear dome light added
torn down and sanded ready to start paint
Self etching primer sprayed and dry
first coat of paint applied
Painted hood with center cowl fade
Painted black trims and reassembled so I can drive to work
Still got alot of work to do but this is where I am at so far. what do you guys think?
Last edited by Mcgver; 04-01-2012 at 04:01 PM. Reason: title change
Thread
Thread Starter
Forum
Replies
Last Post