i want a picture of a BL and STOCK tires. i just need see how bad it looks. Because if its really bad then i will buy tires and bl at the same tire, otherwise i will buy the bl sooner and buy the tires shortly after. depends on how it looks tho.

 

It will look bad. 32's even look bad

 

32s don't look too bad but they look kinda small. Stock tires would look terrible.

 

Phil just get both. It'll look like poo without bigger tires.

 

Hope my 31's look good when I install mine, I'm sure they will. Stock tires look like poo anyways though

 

haha okay

 

you have it the wrong way

bigger tires first, then body lift.

 

^ too bad theyre 33's...

 

That's with 32's and it doesn't look too good. I'd definitely say BL and tires at the same time. Just don't forget you have 3.55 gears so 33's might slow you down a bit unless you want to regear.

 

Judging by your avatar and sig dont you already have a 3" BL?

 

I dont think the 32's look that bad. Wont 33's rub?

 

His sig is wrong. He has a half inch over factory in the rear and about a 1" torsion bar crank. The tires are just TINY. I want to say 235/75R15? With a body lift and the way it sits now he could fit 33's without rubbing. Stone and Justin run a body lift and 33's no problem.

Oh and remember he's a 2wd Edge not a coil-spring truck so he sits higher anyways. Greg isn't yours a coil spring truck? I can't remember from the meet.

 

3" BL cab and 235/75r15's...and stock bed...just to show a comparison...



imo.....buy your lift. then when you got your money...get tires and wheels.....THEN install body lift

Here's 3" bodylift and 32x11.50's...shoot..i had 35's and the bodylift and no rub except at full left crank...rubbed the innerfenderwell in the back....same spot tires rub if they're oversize on the ranger...

 

Ya I talked to Justin about it he said 33 would probably be to big for my truck. I have coil springs.

 

I was gonna post this but I remembered the truck was already an inch shorter... but yeh... still lift w/ stock tires....

 

You also ran with no valance though.

 

so? how does that make a difference? in regards to rubbing? because i didn't rub stock with 32's even with the valence....

idk where that statements coming from bro. lol.

 

I'm wondering how I'd look with Shackles, AAL's, Tbars cranked, and a 3 inch body lift on 32's. Lol I don't want to get rid of the 32's for 33's, hmmmmmm. I have plenty of room,I think I could fit 33's now with just trimming the valance and new Tbars

I must confess. I wasn't a fan of body lifts. BUt I might do one eventually Lol. Maybe I'll be able to fit 35s. Anyone got a guess? Or go metric and find something around a 34..

 

No when you ran 35s with the BL

 

Uh, lol. But the truck was only about an inch lower without the tires.

3inch body lift on stockers




3inch body lift with 33s

 

Freddie, remember andy, Int3rceptor, he ran a bl and 35s with no problems, I pm's him a week back, Ill foward you the message if youd like. No problems, just a small rob of power but we have the 4.0s when he had the 3.0. Im still debating on the 35s....

 

I was looking for Katie's pics.....they would've made a perfect example.


then say that. lol.

 

heres is some pics with 35's a bl and cranked t-bars

 

Shoot i can fit my Q78 Buckshots (aka 35.5's)with no rubbing what so ever at full lock. with a valance. Granted there only 11" wide.

 

it looks bad... and IMO so did my 32's i hated it