What's been taking up my free time lately 71 Chevy C10 SWB
#1
What's been taking up my free time lately 71 Chevy C10 SWB
Over the last 2 years my dad and I have been very busy doing a full frame off restore on a 71 Chevy C10 SWB we picked up. Which is why the progress on the Ranger has been a little on the slow side the last couple years. I won't go into much detail about this truck unless someone asks. But I'll let the pictures talk. I have hundreds of pictures but will stick to the important ones for now.
#5
Thanks guys, it's been a lot of work. Right now it's got a 3" drop in the front and a 5" drop in the rear. In the near future we're gonna get rid of the coil springs and install a air bag setup.
In the last few weeks we got the interior put back together, fuel tank installed and exhaust installed.
In the last few weeks we got the interior put back together, fuel tank installed and exhaust installed.
#9
The engine really isn't nothing spectacular. It's a stock 71 chevy 350 block, previous owner had done a rebuild on the bottom end, new pistons, rings, rods and bearings. We installed a voodoo cam with .504 lift on exhaust, .502 lift on intake, dont remember the duration and timing specs of it. We then grabbed some vortec heads off a mid 90s sbc and had a machine shop rebuild them. It's got double roller rockers, high volume oil pump, hei distrubuter, edelbrock intake amd edelbrock 1406 carburetor. Then it was paired with a 2004r overdrive transmission.
Thread
Thread Starter
Forum
Replies
Last Post
MudSlanger
Suspension Tech
6
03-21-2011 11:13 PM
marcos
General Ford Ranger Discussion
29
10-29-2005 10:47 AM