2.5L header?
#2
not sure, nor am i sure this will help you, but you could look into some of the v8 headers, and just use 1 side of it... 2.5L l4 motors, have the same displacement, per cylinder as a 5L v8.... so the head SHOULD have the same exhaust spacing, and SHOULD work, but i have based this on nothing, but thought and logic...
#3
So i asked if it would for sure fit the 2.5L Ranger and I got this responce back....
Not sure what that means exactly, or how it even relates to my question......
Ebay Item number: 380193793713
Hi,yes it will.It moves the O2 sensor from the top to the bottom and there is plenty of wire.thanks,jan
Not sure what that means exactly, or how it even relates to my question......
Ebay Item number: 380193793713
#5
I emailed them back about the one on ebay and got this
Also found this page that states
So does this mean the 2.5 can use a header that will fit the 2.3??????
Hi,it is a Ford ranger header from a 93-94 ranger.Bolt pattern is standard lima engine pattern.Any 2.3 under body header will work on your engine,you might have to add in a O2 sensor with some of them but they fit.Your truck should have 2 o2 sensors,one in the manifold and one in the down pipe.The 95-97 ford ranger header will also work,you just add a O2 bung to the down pipe.
All 2.0/2.3/2.5 heads will physically bolt in place of each other. They all have similar exhaust port shape and placement. All cams are interchangeable as long as they are used with the proper followers. Later model (1995 and newer) roller cam followers cannot be easily swapped onto an older head as the valve stem size was reduced in the newer heads and matching slot in the follower was reduced. Early 2.0 and 2.3 heads have the same small round intake ports spaced evenly apart. They differ from each other in their valve sizes though.
Last edited by Ranger Wannabe; 01-04-2010 at 02:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FixOrRepairDaily
SOHC - 2.3L & 2.5L Lima Engines
2
11-28-2010 08:47 PM
therangerofdanger
Exterior Semi-Tech
12
09-23-2008 04:57 PM
kenscivic
2.3L & 2.5L I4 Tech
2
08-09-2007 10:19 PM