sas with coil springs Have a couple questions
#1
sas with coil springs Have a couple questions
So I have been throwing around ideas of changing my current set up with leafs to coil springs especially since i already have coil buckets in my frame. I have read around and lead to believe that most prefer Deaver EB lift coils for flex and spring rate? Curious if people with these coils or any coils could drop opinions and actually measure there coils:
im looking for circumference of coil with name brand and type of coil i.e. 4.5" to 5.5" lift
then how many inches it is mounted above frame, because I would be mounting them into my frame
and height of frame off ground Pictures are more than welcome to get my brain tinkering!
If you want you can talk about joints your using to and what you guys prefer hiems creeper or johnny
im looking for circumference of coil with name brand and type of coil i.e. 4.5" to 5.5" lift
then how many inches it is mounted above frame, because I would be mounting them into my frame
and height of frame off ground Pictures are more than welcome to get my brain tinkering!
If you want you can talk about joints your using to and what you guys prefer hiems creeper or johnny
Thread
Thread Starter
Forum
Replies
Last Post
PUNKROCKPILOT
Suspension Tech
55
06-14-2019 06:47 PM
Sonic04Edge
Suspension Tech
9
05-27-2011 03:36 PM