Coilover Adjustment Issues
#1
Coilover Adjustment Issues
Hey guys, i just did my coilover conversion on my sport trac, no superlift, 2wd, running king 2.0 x 6.0 running 12" 600lb springs using rcd brackets to bolt them into place... not long travel. here is the issue I'm havng. I jacked the truck up to tighten the coil nut to lift the truck and even with a tool i can not turn that coil nut. is there any way to adjust them? they dont have spanner wrenches. tried to get some, but they dont even sell them? unbolt the spindle from the uca and let the suspension droop even further? take out the sway bar? or get shorter springs? even lift spindles? im kinda in a bind here and dont know what to do. its my dd, and i can't have it out much longer.
#6
Here is the spanner wrench I would get..it's a "universal" type:
http://www.offroadwarehouse.com/prod...roductID/51634
or here:
http://www.polyperformance.com/shop/...h-p-20277.html
Both places are the same price and same product.
http://www.offroadwarehouse.com/prod...roductID/51634
or here:
http://www.polyperformance.com/shop/...h-p-20277.html
Both places are the same price and same product.
Thread
Thread Starter
Forum
Replies
Last Post
Fw87
General Ford Ranger Discussion
2
04-25-2015 11:08 PM
shooterdude199
Snapshots
17
09-27-2011 02:25 PM