Front end lift
#1
Front end lift
Hi there,
I have an '09 Ranger with:
1.Torsion Bar Crank 1.5
2. PA 3" Body lift
3. Chevy 2" Shackle Drop
4. Add-a-Leafs
5. Procomp front suspension
6. Billstein Rear.
7. 33x11.5 Procomp Xtreme All-terrain
Truck looks awesome, but I'm wanting to lift the front end up a few inches so that it lvls out the truck. However, I've discovered that Superlift is now Bankrupt, and is hard to get ahold of their products.
Does anyone have any suggestions for a way to lift the front up?
Thanks!
I have an '09 Ranger with:
1.Torsion Bar Crank 1.5
2. PA 3" Body lift
3. Chevy 2" Shackle Drop
4. Add-a-Leafs
5. Procomp front suspension
6. Billstein Rear.
7. 33x11.5 Procomp Xtreme All-terrain
Truck looks awesome, but I'm wanting to lift the front end up a few inches so that it lvls out the truck. However, I've discovered that Superlift is now Bankrupt, and is hard to get ahold of their products.
Does anyone have any suggestions for a way to lift the front up?
Thanks!
#2
i would start off by doing what we call the 'prekey' mod.. theres lots of threads here on RF explaining it, but basically Ford changed the front end torsion key adjusters on 2008+ trucks...to make them sit lower...
so if you throw in a set of torsion adjusters from a 98-2007 Ranger you should gain at the very least roughly 1.5" in the front..
read up on it!
so if you throw in a set of torsion adjusters from a 98-2007 Ranger you should gain at the very least roughly 1.5" in the front..
read up on it!
#3
#4
Thread
Thread Starter
Forum
Replies
Last Post
01_Camaro_SS
Exterior Semi-Tech
7
12-20-2016 05:00 PM
red56rod
Solid Axle Swaps
7
04-02-2012 01:00 PM