I have been looking on here about information about spindle lifts and i have a question. Some spindle lifts have a recomended backspacing and others dont say. Does anyone know if someone makes a spindle lift kit that would work with the stock 4.5" backspacing?

 

I'm wondering this, too. I dont have money for rims but I want a lift and if stock backspacing is 4.5" then you get by with a 1.5" wheel spacer.

Buy some for the back or swap an explorer axle in and you're ok.

 

Fabtech no.. you need what over 3.75 or something along those lines

 

Looking at Doetsch's site it looks like the stock backspacing would work. It says a min of 3.5 and a max of 4.5.

http://www.doetsch-shocks.com/29.asp

Is anyone running the Doetsch spindle lift with wheels that have stock backspacing? any problems?

 

yes there is a few guys that have doesnt usually last long

 

4 spacers adds another decent hunk of change to my lifting cost.

I'm running stock rims. The only time I will upgrade is to run better tires which is a LONG way into the future.

My Stockers are fine.


Picwhore

 

I have the doetsch 3" spindle lift with stock rims and 31"s and it looks fine.