Coilover Brackets by ME00stepside (NO LONGER AVAILABLE AS OF 7/23/2021)
#326
01-04-2012
Wirelessly posted (Blackberry 8530)
Alright guys, after playing phone tag for a couple of days, I'm picking up the brackets after work today. I won't get the ones to the powder coater until tomorrow morning, but I'll check out all the parts tonight and make sure I'm happy with them. I will keep you posted and try to get a few pics up.
Alright guys, after playing phone tag for a couple of days, I'm picking up the brackets after work today. I won't get the ones to the powder coater until tomorrow morning, but I'll check out all the parts tonight and make sure I'm happy with them. I will keep you posted and try to get a few pics up.
#328
01-04-2012
Wirelessly posted (Blackberry 8530)
I have the brackets in my possession and they\'re looking good at first glance. I\'ll check them all out later this evening.
A few things:
1) He forgot to cut the gussets. He\'s going to do that over the next few days. Hopefully I\'ll have them by the weekend.
2) The upper spacers are steel. I\'d planned on aluminum, but there was apparently a miscommunication. No big deal. I just like aluminum.
3) He made two more sets han I had expected, so I have two more available from this run! First come, first serve, of course.
I\'ll try to get a few pics up while I\'m checking them out tonight.
I have the brackets in my possession and they\'re looking good at first glance. I\'ll check them all out later this evening.
A few things:
1) He forgot to cut the gussets. He\'s going to do that over the next few days. Hopefully I\'ll have them by the weekend.
2) The upper spacers are steel. I\'d planned on aluminum, but there was apparently a miscommunication. No big deal. I just like aluminum.
3) He made two more sets han I had expected, so I have two more available from this run! First come, first serve, of course.
I\'ll try to get a few pics up while I\'m checking them out tonight.
Last edited by ME00Stepside; 01-04-2012 at 02:46 PM.
#330
01-05-2012
OK, here are a couple of pics, as promised. Sorry for the quality, they're cell pics, no flash.
I'm very happy with the brackets, although I need to bend the bottoms around a little bit more on some because they're not quite a 90°. Not a big deal. I think for the next run, I'm going to make a special jig for bending these instead of having him bend them at the shop.
I'm going to be dropping off the ones to be powdercoated today, as well as picking up the hardware. I'll keep you posted on progress.
On to the pics:
I'm very happy with the brackets, although I need to bend the bottoms around a little bit more on some because they're not quite a 90°. Not a big deal. I think for the next run, I'm going to make a special jig for bending these instead of having him bend them at the shop.
I'm going to be dropping off the ones to be powdercoated today, as well as picking up the hardware. I'll keep you posted on progress.
On to the pics:
Still one set from this batch left!
#333
01-05-2012
Join Date: Jul 2011
Location: Shirley, ny
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
#334
01-05-2012
Join Date: Feb 2010
Location: Vancouver island B.C.
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
#335
01-05-2012
#337
01-05-2012
Wirelessly posted (Blackberry 8530)
The spacers are getting powdercoated.
Ford04Ranger4.0, I posted pics of them on my truck a few pages back. This is the production run. I posted pics merely as an update for the guys waiting for them. I've had mine on for almost two months now, I believe, and they're doing quite well.
The spacers are getting powdercoated.
Ford04Ranger4.0, I posted pics of them on my truck a few pages back. This is the production run. I posted pics merely as an update for the guys waiting for them. I've had mine on for almost two months now, I believe, and they're doing quite well.
#338
01-05-2012
Wirelessly posted (Blackberry 8530)
The spacers are getting powdercoated.
Ford04Ranger4.0, I posted pics of them on my truck a few pages back. This is the production run. I posted pics merely as an update for the guys waiting for them. I've had mine on for almost two months now, I believe, and they're doing quite well.
The spacers are getting powdercoated.
Ford04Ranger4.0, I posted pics of them on my truck a few pages back. This is the production run. I posted pics merely as an update for the guys waiting for them. I've had mine on for almost two months now, I believe, and they're doing quite well.
I'm waiting on tax returns so i can buy a set
Last edited by 99offroadrngr; 01-05-2012 at 10:52 PM.
#339
01-06-2012
Join Date: Feb 2010
Location: Vancouver island B.C.
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
#340
01-06-2012
Wirelessly posted (Blackberry 8530)
Ugh. Didn't go back to see if I lost any pics in the server crash. I'll either dig them up over the weekend or take some new ones.
As for the clearance on the passenger side, I actually had a little more than the drivers side.
Lastly, the final set from this run is spoken for. Once these are all done and sent out, I'll start up interest for another batch. Stay tuned!
Ugh. Didn't go back to see if I lost any pics in the server crash. I'll either dig them up over the weekend or take some new ones.
As for the clearance on the passenger side, I actually had a little more than the drivers side.
Lastly, the final set from this run is spoken for. Once these are all done and sent out, I'll start up interest for another batch. Stay tuned!
#341
01-06-2012
Join Date: Oct 2011
Location: las vegas nevada
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I got the other extra one.
#343
01-06-2012
Join Date: Feb 2010
Location: Vancouver island B.C.
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
#344
01-07-2012
Join Date: Oct 2011
Location: Toronto, Canada
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
just have a quick question regarding spring rate... i just ordered myself a new heavy duty bumper from Iron bull bumpers, and with the extra 180 lbs (im pretty sure) in the front, should i consider getting 850 or even 900 lbs springs? i want to try and level the front of my truck with the back. i am superlifted
#346
01-08-2012
OK guys, I have an issue, and since you've all been waiting for these, I want to defer to you.
I have gone through all of the brackets, and I'm very happy with the uppers. They're all exactly as I expected.
However, most of the bottoms are bent less than the full 90° I wanted them for a nice snug fit to the control arm. The holes are correct, the welding of the uprights is right, and the brackets will fit the control arm, but the side tab does not sit flush against the side of the control arm. I have taken a picture of the worst of them, and I want to know if you guys are willing to wait while I have the bends corrected, or if you want me to just get the brackets sent out to you guys. My personal preference is to get them bent the rest of the way, but since you guys are waiting on your brackets, I want to know from you.
Let me know ASAP, by either sending me a PM, or posting here. If some guys want them as is, and some guys want them fixed, that's not a problem at all.
I have gone through all of the brackets, and I'm very happy with the uppers. They're all exactly as I expected.
However, most of the bottoms are bent less than the full 90° I wanted them for a nice snug fit to the control arm. The holes are correct, the welding of the uprights is right, and the brackets will fit the control arm, but the side tab does not sit flush against the side of the control arm. I have taken a picture of the worst of them, and I want to know if you guys are willing to wait while I have the bends corrected, or if you want me to just get the brackets sent out to you guys. My personal preference is to get them bent the rest of the way, but since you guys are waiting on your brackets, I want to know from you.
Let me know ASAP, by either sending me a PM, or posting here. If some guys want them as is, and some guys want them fixed, that's not a problem at all.
#350
01-08-2012
