Coilover Brackets by ME00stepside (NO LONGER AVAILABLE AS OF 7/23/2021)
#1077
#1078
#1081
I feel bad because I'm being quite lazy doing this, but can anyone tell me what I need to order from ORW?
Superlifted Ranger. I believe i need the limiting strap, shock and coils.
I'm also reading the thread but it's ----ing long and i was kinda hoping some guy with same truck could just drop some part numbers or specifics on me :)
Superlifted Ranger. I believe i need the limiting strap, shock and coils.
I'm also reading the thread but it's ----ing long and i was kinda hoping some guy with same truck could just drop some part numbers or specifics on me :)
#1082
#1083
#1084
#1085
Mmhmm at my job i literally do nothing for 9 hours a day but unfortunately my work computer, r-f is blocked. Their filter is super lame. So when I get off work im usually getting **** done instead of researching. But ill work on it tonight :)
#1086
I feel bad because I'm being quite lazy doing this, but can anyone tell me what I need to order from ORW?
Superlifted Ranger. I believe i need the limiting strap, shock and coils.
I'm also reading the thread but it's ----ing long and i was kinda hoping some guy with same truck could just drop some part numbers or specifics on me :)
Superlifted Ranger. I believe i need the limiting strap, shock and coils.
I'm also reading the thread but it's ----ing long and i was kinda hoping some guy with same truck could just drop some part numbers or specifics on me :)
Also, I've never added the limit straps and/or bump stops to this list since they will vary depending on where & how you mount everything.
Superlifted Truck (Confirmed via PM this setup works 100%):
Stock Height Truck (Confirmed via multiple member this setup works 100%):
Of course, part #'s will vary depending on the desired spring rates. Also the Fox part #'s will vary depending on the body finish (cadmium versus upgraded chrome), as well as body color (blue versus black - but I don't think you can get the blue anymore). Tons of info on Fox shocks (Extended/Collapsed Info as well): http://www.off-roadproducts.com/FOX08Coilover.htm
Also, when I purchased my Fox coilovers, they were custom valved by the dealer to match the usage. A benefit of Fox CO’s – and good dealers do this for free & won’t sell them without it being done....I think that's VERY important as it can change everything about how the shock "rides". He asked me many questions about the usage in order to dial it in correctly (type of truck, on-road versus off-road usage, high-speed or low-speed. etc.).
Last edited by logan03CO; 06-04-2013 at 05:19 AM.
#1088
#1089
#1090
#1092
#1093
Off Road Warehouse - Shocks King Shocks 2.0'' Coil-Over Non-Reservoir King Shocks King 2.0'' Performance Race Coil-Over Emulsion Shock 10'' Travel(No Springs)(7/8'' Shaft)
Are those the King coilovers you are referring to?
Are those the King coilovers you are referring to?
#1094
Off Road Warehouse - Shocks King Shocks 2.0'' Coil-Over Non-Reservoir King Shocks King 2.0'' Performance Race Coil-Over Emulsion Shock 10'' Travel(No Springs)(7/8'' Shaft)
Are those the King coilovers you are referring to?
Are those the King coilovers you are referring to?
If your just using this bracket kit - I believe the extended & collapsed lengths on those are way out of wack for our trucks (even if Superlifted).
That 10" King Setup = (27.050'' & 17.050'')
Confirmed working setup for a Stock Height Truck = (16.40" & 11.30") = Fox Coilover 5" Travel
Confirmed working setup for a Superlifted Truck = (19.35" & 12.85") = Fox Coilover 6.5" Travel
Last edited by logan03CO; 06-07-2013 at 07:01 PM.
#1096
OK, still waiting on the powdercoating, but the shop assured me I should be able to pick them up this week.
I should also be picking up the hardware in a couple of days, so if all goes well, I'll be packing and shipping this weekend.
Round 4:
SteelDirigible - Powdercoated - paid
RLong31 - Powdercoated
Brandon22685 - Powdercoated - paid
FFBill - Raw
Jatha05 - Raw - paid
bigmoon - Powdercoated - paid
moonliteshawn - Powdercoated - paid
tylerbird - Raw
ecrase2500 - Powdercoated - paid
Jared152 - Powdercoated
If you haven't paid yet, please try to get it to me ASAP.
Stay tuned!
I should also be picking up the hardware in a couple of days, so if all goes well, I'll be packing and shipping this weekend.
Round 4:
SteelDirigible - Powdercoated - paid
RLong31 - Powdercoated
Brandon22685 - Powdercoated - paid
FFBill - Raw
Jatha05 - Raw - paid
bigmoon - Powdercoated - paid
moonliteshawn - Powdercoated - paid
tylerbird - Raw
ecrase2500 - Powdercoated - paid
Jared152 - Powdercoated
If you haven't paid yet, please try to get it to me ASAP.
Stay tuned!
#1097
Bumping the pricing and the new list to the last page:
Kit with powdercoated brackets: $290
Kit with raw brackets: $270
Shipping:
$17 US
$46 Canada
Kit includes:
4 brackets (2 upper, 2 lower)
4 gussets to reinforce shock tower
2 shock tower spacers for upper mounts
8 rod end spacers (for 1/2" wide rod ends--like Fox)
All hardware to install--grade 8 zinc plated
Round 5:
c.obrien - powdercoated
moneypit - powdercoated
obie - powdercoated
Kit with powdercoated brackets: $290
Kit with raw brackets: $270
Shipping:
$17 US
$46 Canada
Kit includes:
4 brackets (2 upper, 2 lower)
4 gussets to reinforce shock tower
2 shock tower spacers for upper mounts
8 rod end spacers (for 1/2" wide rod ends--like Fox)
All hardware to install--grade 8 zinc plated
Round 5:
c.obrien - powdercoated
moneypit - powdercoated
obie - powdercoated
#1098
Member
iTrader: (1)
Join Date: May 2011
Location: buffalo, ny
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Are these the soanner wrenches I will need?
https://www.offroadwarehouse.com/pro...roductID/51661
I saw this one listed, but there was another one listed as well that I could not locate. I didn't know if I should be getting 2 of these or if there were two different wrenches.
https://www.offroadwarehouse.com/pro...roductID/51661
I saw this one listed, but there was another one listed as well that I could not locate. I didn't know if I should be getting 2 of these or if there were two different wrenches.
#1099
If you’re getting a 2.0 series setup from Fox they require two different sizes - You will need both.
Any spanner wrenches that say they are for a 2.0 series Fox setup will work fine.
I happened to pick mine up from here:
Spanner Wrench Fox 2.0 Large
Spanner Wrench Fox 2.0 Small
The need for two different sizes can be seen here:
Any spanner wrenches that say they are for a 2.0 series Fox setup will work fine.
I happened to pick mine up from here:
Spanner Wrench Fox 2.0 Large
Spanner Wrench Fox 2.0 Small
The need for two different sizes can be seen here:
Last edited by logan03CO; 06-10-2013 at 02:31 PM.
#1100
Yes. That is the wrench that came with my coilovers. Whether the company sends them with c/o purchase or the guy I bought mine off of bought one. I dunno. I do know this, when adjusting your preload. Use of a breaker bar helps. Those square holes fit one perfectly.
Edit:
Logan why do you need two? I used the one in the link in question for both rings.
Edit:
Logan why do you need two? I used the one in the link in question for both rings.