Extended brake lines?
#1
Extended brake lines?
Hey guys what's up I'm new to the form just moved up here to New Hampshire and bought a 2002 ranger XLT 4x4. Bought it with 105,000 miles on it. I flushed the transmission changed the oil put new wires new plugs and a new coil pack and fuel filter on it need to flush the radiated. It seems to be running ok. So now I want to put a lift on it. I'm not looking to spend thousands of dollars on a lift so here's my setup I'm going with. I do have a few question about it. I do have a mechanical background and I build custom motorcycles but there is a few things I'd like to know before tearing into it.
Mods to be done.
•Torsion crank
•Bell tech 6400 shackles
•New rancho shocks all around
•3" body lift
•15x8 w/ 3.75 backspacing wrapped with procomp 33x12.5 M/T
My questions are with putting the shackles and cranking the torsion bar plus the body lift will I need longer brake lines?
Also any tips or problems others have ran into would be greatly appreciated.
**i know I have to get it aligned after the fact.
Mods to be done.
•Torsion crank
•Bell tech 6400 shackles
•New rancho shocks all around
•3" body lift
•15x8 w/ 3.75 backspacing wrapped with procomp 33x12.5 M/T
My questions are with putting the shackles and cranking the torsion bar plus the body lift will I need longer brake lines?
Also any tips or problems others have ran into would be greatly appreciated.
**i know I have to get it aligned after the fact.
#2
#3
#4
yeah you'll be fine. I'd do an add-a-leaf kit instead of shackles and you'll still get 2 or 3 inches of lift, depending which kit you go with.
one thing i recommend before doing the body lift is to spray every body mount bolt from the underside with PB blaster once per day for a week before doing the lift. I live in MA and did that and they came out like butter but my truck also has 0 rust and is factory undercoated. Also the body lift should be easy. I did the one on my current truck (2nd one ive done) in 11 hours by myself.
good luck!
one thing i recommend before doing the body lift is to spray every body mount bolt from the underside with PB blaster once per day for a week before doing the lift. I live in MA and did that and they came out like butter but my truck also has 0 rust and is factory undercoated. Also the body lift should be easy. I did the one on my current truck (2nd one ive done) in 11 hours by myself.
good luck!
Thread
Thread Starter
Forum
Replies
Last Post