Suspension Tech General discussion of suspension for the Ford Ranger.

Add a leaf... AAL actual lift

Thread Tools
 
Search this Thread
 
  #1  
Old 09-08-2008
rideabikenick's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Dec 2006
Location: Deltona, Fl.
Posts: 3,486
Likes: 0
Received 0 Likes on 0 Posts
Add a leaf... AAL actual lift

i done a search, and have seen different aproximations for the amount of lift an AAL gives. iv been thinkin about getting ride of mine and putting a block back their so i can acheive a smother ride

so what is the real lift that AAL give? when i look under my truck, it looks like its only giving what the thickness of the leaf is which is like maybe 1".
 
  #2  
Old 09-08-2008
MOTOunplugged's Avatar
Member
iTrader: (1)
Join Date: Mar 2008
Location: Covington, Georgia
Posts: 759
Likes: 0
Received 1 Like on 1 Post
you could always add shackles instead
 
  #3  
Old 09-08-2008
HighRollerII's Avatar
RF Veteran
iTrader: (4)
Join Date: Jun 2004
Location: Charleston, SC
Posts: 10,073
Likes: 0
Received 4 Likes on 4 Posts
i think 1.5" to 2" again I think!!
 
  #4  
Old 09-08-2008
08XLT4x4's Avatar
Member
iTrader: (7)
Join Date: Mar 2008
Location: bomba shack
Posts: 3,257
Likes: 0
Received 2 Likes on 2 Posts
the procomp short AAL has been reported to give anywhere from 1.5 - 2" of lift.

Chevy drop shackles (made by Beltech) will give you another 1.5 - 2" of lift if you need more.

In my truck, i did the Skyjacker leafsprings for 4" of rear end lift. IMO, that is the best option, although its a fairly expensive
 
  #5  
Old 09-08-2008
rideabikenick's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Dec 2006
Location: Deltona, Fl.
Posts: 3,486
Likes: 0
Received 0 Likes on 0 Posts
i already have the beltech shackles on with my AAL already. just want to have a smoother ride in the back.

so if you say its gives you between 1.5-2" lift, u think if i took out the stock 2" block and replaced it with a 3" or 4" and keep the shackle in it would be the same lift as it is now?

ps- i have the procomp AAL
 
  #6  
Old 09-08-2008
08XLT4x4's Avatar
Member
iTrader: (7)
Join Date: Mar 2008
Location: bomba shack
Posts: 3,257
Likes: 0
Received 2 Likes on 2 Posts
personally, i dont like lift blocks.

the AAL is what is causing the rough ride, not the shackles. it really stiffens the rear end.

the skyjacker leafs are very smooth. smoother than stock. like i said though, they are about $450 so maybe not your best option if cost is an issue.
 
  #7  
Old 09-08-2008
rideabikenick's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Dec 2006
Location: Deltona, Fl.
Posts: 3,486
Likes: 0
Received 0 Likes on 0 Posts
i know AAL are causing the rough ride, that why i wana take them out.

you have the part # for the skyjacker leafs? they come from summit?
 
  #8  
Old 09-08-2008
08XLT4x4's Avatar
Member
iTrader: (7)
Join Date: Mar 2008
Location: bomba shack
Posts: 3,257
Likes: 0
Received 2 Likes on 2 Posts
yeah, part numbers are: FR34S for the 4" lift and FR36S for the 6" lift.

Note: the lift you get is WITH the stock 2" blocks. So if you want to get rid of the blocks and still have 4" of lift, get the FR36 springs (6" springs - 2" blocks = 4" total lift).

Another note: Skyjacker says these are for 97 and older rangers, but that is not true, they will fit all years, 1994 and later.

Summit does have them, do a google search too, theres a ton of retailers that sell them.
 
  #9  
Old 09-08-2008
rideabikenick's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Dec 2006
Location: Deltona, Fl.
Posts: 3,486
Likes: 0
Received 0 Likes on 0 Posts
got it, thanks for the help. ill look into them
 
  #10  
Old 09-09-2008
FRXLT's Avatar
Member
iTrader: (6)
Join Date: Mar 2008
Location: San Jose, CA
Posts: 822
Likes: 0
Received 1 Like on 1 Post
I'm with 08XLT4x4 on the no blocks. If you add some Skyjacker 4" leaf spring pack and no blocks you will have a lot smoother ride. Then add a James Duff Traction Bar and your rear end will be more stable. I'm going with Skyjacker 6" springs Belltech drop shackles and James Duff Traction Bar. I hope to be at level with the front or a little raked. I hate blocks and AAL, your stock leaf springs wear out quicker (depending on how you use your truck) and blocks can cause axle wrap.
 
  #11  
Old 09-09-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
You could keep the block, lose the aal, and get different spring rate rear springs...alot like how torsion bars have different spring rates(#1 B F).

If you've got C rated rear springs...might consider getting K's because they are 'softer'.

I put short AAL's, 2" drop shacles, and bilstein 5100's and it rides great!
 
  #12  
Old 09-10-2008
rideabikenick's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Dec 2006
Location: Deltona, Fl.
Posts: 3,486
Likes: 0
Received 0 Likes on 0 Posts
how do i found out what my springs are rated?
 
  #13  
Old 09-10-2008
08XLT4x4's Avatar
Member
iTrader: (7)
Join Date: Mar 2008
Location: bomba shack
Posts: 3,257
Likes: 0
Received 2 Likes on 2 Posts
sticker on the side of your door jamb. it has all the equipment codes.
 
  #14  
Old 09-10-2008
gatorblue92's Avatar
RF Veteran
Join Date: Jun 2004
Location: Delaware
Posts: 8,238
Likes: 0
Received 2 Likes on 2 Posts
i have the 6" skyjacker springs with no blocks and the truck rides very smooth
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
99offroadrngr
How-To & DIY Submissions
12
04-05-2014 08:05 PM
craigs2869
Suspension Tech
0
10-03-2011 02:32 PM
05Level2
Suspension Tech
7
11-23-2010 08:37 AM
Chucks05EDGE
Suspension Tech
6
07-20-2006 03:26 PM
mx98ranger
Suspension Tech
18
06-03-2006 10:28 PM



Quick Reply: Add a leaf... AAL actual lift



All times are GMT -6. The time now is 05:44 PM.