pictures of my torsion lift
#5
Join Date: Oct 2004
Location: Coal Region, MTC to be exact...heart of the coal region.
Posts: 2,232
Likes: 0
Received 3 Likes
on
3 Posts
from daveandjulie: It wouldn't make any difference what you do with the preload on the torsion bars, you can fit the same size tires whether you mess with the preload or not. All you've done is affect the ride height by increasing the preload on the spring. And all that does is change where the suspension sits in the suspension cycle when it is static. It doesn't change anything about the original suspension travel as those points are all still exactly the same as they were before. When you bottom your suspension it, and whatever tire you have, will be in the same place no matter what the preload on the spring is.
You've increased driveline angles, if you have 4wd which will wear the cv joints sooner, decreased ride quality, decreased the suspensions ability to absorb road imperfections, and reduced traction and braking efficiency because the suspension does hot have sufficient static sag and therefore limited or no downtravel.
Playing with the t-bars has only negative effects as far as suspension functionality goes, the only arguably positive thing that comes from it is purely asthetic.
You've increased driveline angles, if you have 4wd which will wear the cv joints sooner, decreased ride quality, decreased the suspensions ability to absorb road imperfections, and reduced traction and braking efficiency because the suspension does hot have sufficient static sag and therefore limited or no downtravel.
Playing with the t-bars has only negative effects as far as suspension functionality goes, the only arguably positive thing that comes from it is purely asthetic.
#8
So leveling coils or leveling spacers on a TTB are not a lift? Because all it does it change the hieght of the suspension when it is static? It does not increase your flex or suspension travel anymore because you are still being limited by the stock axle pivot brackets, radius arms, and such? But you said you can fit the same size tires with or without a crank of the torsion bar, Trevelyn said he fit 32's with the crank and leveling spacers on a gen 3 will allow 33x10.50s with no rubbing. So I still am confused with this not being a "lift". It's not a "lift kit" for sure, but increasing the ride height seems like it would consitute a lift. And you did say cranking the T bars is a result from this...
I'm not trying to be rude or anything, I just don't know much about the 98+ IFS suspension and learning more never hurts :) .
I'm not trying to be rude or anything, I just don't know much about the 98+ IFS suspension and learning more never hurts :) .
#9
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Trevelyn1015
well, amazingly i couldn't fit the 32's on my truck until i cranked the t-bars... and they rubbed, so we cranked a little more, and now they don't rub...
The point I am trying to make it that the torsion bar is not a ride height adjustment, it is a spring preload adjustment. It does affect the ride height of the vehicle, but it does so with consequences to the spring rate. A real ride height adjustment does nothing but change the ride height, the preload on the spring itself is unaffected. Stock Rangers do not have that feature.
Only negative things come from adjusting the preload on the torsion bar, I can't think of anything functionally positive.
#10
Originally Posted by Lone Ranger 93
So leveling coils or leveling spacers on a TTB are not a lift? Because all it does it change the hieght of the suspension when it is static? It does not increase your flex or suspension travel anymore because you are still being limited by the stock axle pivot brackets, radius arms, and such? But you said you can fit the same size tires with or without a crank of the torsion bar, Trevelyn said he fit 32's with the crank and leveling spacers on a gen 3 will allow 33x10.50s with no rubbing. So I still am confused with this not being a "lift". It's not a "lift kit" for sure, but increasing the ride height seems like it would consitute a lift. And you did say cranking the T bars is a result from this...
I'm not trying to be rude or anything, I just don't know much about the 98+ IFS suspension and learning more never hurts :) .
I'm not trying to be rude or anything, I just don't know much about the 98+ IFS suspension and learning more never hurts :) .
#11
Originally Posted by Dave and Julie
There are two possible explinations for that. It could be because you have increased the spring rate so much that the suspension no longer flexes enough during the impacts experienced in your normal driving so that the tire never moves far enough to rub. Or it could be that the tires didn't fit when the suspension was in the area of the cycle that it was with the stock preload setting, and now that you've changed it they will fit. In either case, the tire will still rub exactly as it did before if the suspension is subjected to the right load to move to the place in its cycle where the tire will rub.
The point I am trying to make it that the torsion bar is not a ride height adjustment, it is a spring preload adjustment. It does affect the ride height of the vehicle, but it does so with consequences to the spring rate. A real ride height adjustment does nothing but change the ride height, the preload on the spring itself is unaffected. Stock Rangers do not have that feature.
Only negative things come from adjusting the preload on the torsion bar, I can't think of anything functionally positive.
The point I am trying to make it that the torsion bar is not a ride height adjustment, it is a spring preload adjustment. It does affect the ride height of the vehicle, but it does so with consequences to the spring rate. A real ride height adjustment does nothing but change the ride height, the preload on the spring itself is unaffected. Stock Rangers do not have that feature.
Only negative things come from adjusting the preload on the torsion bar, I can't think of anything functionally positive.
On that note about negative things a result from this, I totally agree with ya there! Ford did not intend for their rangers to be modified, among others, so would it be safe to assume any major modification will adversely affect the behavior of the truck because Ford did not intend for the vehicle to be subject to this sort of modifcation?
#12
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
Likes: 0
Received 1 Like
on
1 Post
It's not really a Ford thing per se. It's a general suspension thing. You need a certain amount of static sag (roughly 30%) for a suspension to perform well. If you put so much preload into the spring that the suspension sits at the top of it's travel you'll have no static sag, no down travel. You need down travel to get the best performance.
#13
#16
Unregistered User
Posts: n/a
this is funny
Ford says that up to one inch of front suspension droop is normal within the first 500 miles on there torsion bar trucks!
i leveled mine back out at 2500 miles, and again at 10,000 miles, at 13,000 miles the front is sagging again a tad.
i can see new explorer bars are in my future, unless sway-a-way starts making some for rangers soon!
it doest hurt anything if you tighten them up from time to time, just dont "crank them all the way"
i personaly would like to see some hard facts as to when you should never adjust the preload on torsion bars!
on most older GM IFS 4x4's adjusting preload is part of the front end alignment!
Dave?
Ford says that up to one inch of front suspension droop is normal within the first 500 miles on there torsion bar trucks!
i leveled mine back out at 2500 miles, and again at 10,000 miles, at 13,000 miles the front is sagging again a tad.
i can see new explorer bars are in my future, unless sway-a-way starts making some for rangers soon!
it doest hurt anything if you tighten them up from time to time, just dont "crank them all the way"
i personaly would like to see some hard facts as to when you should never adjust the preload on torsion bars!
on most older GM IFS 4x4's adjusting preload is part of the front end alignment!
Dave?
#18
heres my deffinition step one
Go take a messuring tape put the end on the ground "beside front tire" extend tape until u reach the fender
step 2 scrible down the number u got...now go twist ur t bars and take the number again.......
if it's higher than it was when u first did it wala lifted lol
Go take a messuring tape put the end on the ground "beside front tire" extend tape until u reach the fender
step 2 scrible down the number u got...now go twist ur t bars and take the number again.......
if it's higher than it was when u first did it wala lifted lol
#19
#20
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by 04 EDGE
i personaly would like to see some hard facts as to when you should never adjust the preload on torsion bars!
We already agree that they should not be adjusted until the bolt bottoms out.
I haven't looked, but does the Ford spec call for at ride height bushing installation for the front end? Adjusting the torsion bar preload also twists the bushings which can cause premature failure.
#22
I am going to have to crank mine, I am actually starting to get some negative camber going on. You can see that both of the front tires are tilted in at the top a little. Just enough to bug the heck out of me. What are these explorer torsion bars that you speak of? This sounds interesting.
Thread
Thread Starter
Forum
Replies
Last Post
01RangerEdge
OLD - Suspension, Tires, & Wheels
7
01-10-2013 05:01 AM
RangerNVS
OLD - Suspension, Tires, & Wheels
26
01-22-2010 10:28 AM