Reservoir placement help
#1
Reservoir placement help
So, after much anticipation I got my fox coilovers today. I'd ordered 2.0x6.5 emulsion coilovers. Well, I get the call from 4WheelParts to go pick up shocks. Just before I leave the parking lot something tells me I'd better open the box and make sure everything is good. I open it and much to my surprise there are 2 fox 2.0x6.5 coilover remote reservoir shocks. SWEET!
So yeah, any one have any suggestions on how to mount the reservoirs? I saw a photo on explorerforum.com months ago, but can't seem to find the post and noone over there has replied to my pic request of said post. So I figured I'd come back to home sweet home and ask for help here too.
So yeah, any one have any suggestions on how to mount the reservoirs? I saw a photo on explorerforum.com months ago, but can't seem to find the post and noone over there has replied to my pic request of said post. So I figured I'd come back to home sweet home and ask for help here too.
#4
It was bob's 7100 install. I knew I'd remembered seeing a ranger or exploder with from remotes. Thanks for the heads up. And again, thanks to Bob.
So far the truck rides NICE up front. I still need to level out the coilover springs though. I had my MOOG UCAs installed today, but since I had a little settling (makes sense) from the drive over to the shop I used they opted to not do my alignment (I'm not far off spec) until Monday. Gives me time to fiddle with the front to get it where I want. I just HATE working the spanner. I need to find a small pipe for leverage as my 2-piece jack handles are too long.
Nevertheless, I'm stoked. After 2.5 weeks of being truckless there now be a heartbeat again. Only other thing I wait for now are bushings to install the fox rears. The packing guy at ORW miscounted.
So far the truck rides NICE up front. I still need to level out the coilover springs though. I had my MOOG UCAs installed today, but since I had a little settling (makes sense) from the drive over to the shop I used they opted to not do my alignment (I'm not far off spec) until Monday. Gives me time to fiddle with the front to get it where I want. I just HATE working the spanner. I need to find a small pipe for leverage as my 2-piece jack handles are too long.
Nevertheless, I'm stoked. After 2.5 weeks of being truckless there now be a heartbeat again. Only other thing I wait for now are bushings to install the fox rears. The packing guy at ORW miscounted.
Thread
Thread Starter
Forum
Replies
Last Post