Moog Vs Napa Ball Joints
#1
06-04-2008
Join Date: Sep 2006
Location: CC, Indiana
Posts: 3,832
Likes: 0
Received 0 Likes
on
0 Posts
Moog Vs Napa Ball Joints
Any diffrence? Napa is close to my house and per online stores the Napa upper arms and lower ball joints are not much more. I will prabably only spend $20 dallors to get the napa.
I plan on replacing them when I do my front suspension. I am not doing a lift but looking for more travel like a pre runner. So which do you think will hold up better? Or is there really no diff?
I plan on replacing them when I do my front suspension. I am not doing a lift but looking for more travel like a pre runner. So which do you think will hold up better? Or is there really no diff?
#2
06-04-2008
Moog. You already know my opinion. BTW Napa the uppers if they go out you have to replace the WHOLE arm not just the balljoint.
www.rockauto.com has the arms you need.
www.rockauto.com has the arms you need.
#3
06-04-2008
Unregistered User
Posts: n/a
Moog. You already know my opinion. BTW Napa the uppers if they go out you have to replace the WHOLE arm not just the balljoint.
www.rockauto.com has the arms you need.
www.rockauto.com has the arms you need.
#5
06-05-2008
My opinion is based on many who work in the world of automotive greatness.....they are just about the only joint out there, that outlasts OEM.
Plus, the upper arms have replaceable ball joints, where anywhere else sells joints builts into the arm...non replaceable. So......
Yea......I got the uppers for $105 each, and the lowers for about $30 each.....Total from rockauto.com was $300 shipped for 2 uppers, 2 lowers, and 1 set of moog cam bolts.
#6
06-05-2008
Join Date: Dec 2004
Location: Opelousas, Louisiana
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
#7
06-05-2008
#10
06-05-2008
#11
06-06-2008
#12
06-06-2008
NAPA used to sell a "fleet grade" balljoint that was supposed to be very good. I tried to buy some a year ago and was told that they had been discontinued. Same for Modine radiators that they used to carry. Like so many stores, NAPA is switching over to high profit Chinese parts for a lot of their lines.
Also, it's always a good idea to check inside the box(es) before you leave the parts store. I recently bought 2 TRW lower balljoints for our van. Opened up a box and verified that it was greasable. Cool ... or so I thought. Got home and found that one was greasable and the other was not. Arrgh. Same company, same box, same part number. Took it back, then had to go to another store across town to find a second greasable joint.
Also, it's always a good idea to check inside the box(es) before you leave the parts store. I recently bought 2 TRW lower balljoints for our van. Opened up a box and verified that it was greasable. Cool ... or so I thought. Got home and found that one was greasable and the other was not. Arrgh. Same company, same box, same part number. Took it back, then had to go to another store across town to find a second greasable joint.
#13
06-06-2008
#14
06-06-2008
I'm looking to upgrade to MOOG uppers and lowers.
Can someone provide the part#'s for these? I want to order them asap for a 2002 ranger edge.
I'm guessing it's K8708T or K8710T or K80068? Those are for the uppers anyway, haven't found the lowers.
Can someone please confirm before I purchase these?
Can someone provide the part#'s for these? I want to order them asap for a 2002 ranger edge.
I'm guessing it's K8708T or K8710T or K80068? Those are for the uppers anyway, haven't found the lowers.
Can someone please confirm before I purchase these?
#15
06-06-2008
The 2-piece passenger side arm (MOOG K8710T) is out of production although you still may be able to find them out there. If not, just substitue the 1-piece PS arm (MOOG K80068).
Driver side is one-piece for yours (MOOG K8708T)
Some part numbers for UCAs, lower ball joints and tie rod ends.
Driver side is one-piece for yours (MOOG K8708T)
Some part numbers for UCAs, lower ball joints and tie rod ends.
Originally Posted by rwenzing
These numbers are for with Rangers with torsion bar suspension (98+ 4x4, 2000 Trailhead, 2001+ Edge).
DS one-piece UCA 98~2006:
(MOOG K8708T):
UCA w/replaceable/greasable ball joint
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS one-piece UCA 2003 1/2~2006:
(MOOG K80068)
UCA w/replaceable/greasable ball joint
Similar appearance to K8708T above but with slightly different ball joint offset.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS 2-piece style ball joint carrier only 98~2003 1/2
(MOOG K8710T) :
Carrier w/replaceable/greasable ball joint
Note: this part is discontinued and may not be available. The entire 2-piece PS UCA assembly can be replaced by the 1-piece K80068.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lower ball joint only 98+
Greasable, fits DS and PS
(MOOG K8695T)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Outer tie rod ends
Greasable, fits DS and PS
(MOOG ES3461)
DS one-piece UCA 98~2006:
(MOOG K8708T):
UCA w/replaceable/greasable ball joint
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS one-piece UCA 2003 1/2~2006:
(MOOG K80068)
UCA w/replaceable/greasable ball joint
Similar appearance to K8708T above but with slightly different ball joint offset.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS 2-piece style ball joint carrier only 98~2003 1/2
(MOOG K8710T) :
Carrier w/replaceable/greasable ball joint
Note: this part is discontinued and may not be available. The entire 2-piece PS UCA assembly can be replaced by the 1-piece K80068.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lower ball joint only 98+
Greasable, fits DS and PS
(MOOG K8695T)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Outer tie rod ends
Greasable, fits DS and PS
(MOOG ES3461)
#16
06-06-2008
The 2-piece passenger side arm (MOOG K8710T) is out of production although you still may be able to find them out there. If not, just substitue the 1-piece PS arm (MOOG K80068).
Driver side is one-piece for yours (MOOG K8708T)
Some part numbers for UCAs, lower ball joints and tie rod ends.
Driver side is one-piece for yours (MOOG K8708T)
Some part numbers for UCAs, lower ball joints and tie rod ends.
1 - DS one-piece UCA 98~2006:
(MOOG K8708T): For Driver side?
Or will this fit DS & PS?
1 - PS one-piece UCA 2003 1/2~2006:
(MOOG K80068) : For Passenger Side?
Or will this fit DS & PS?
2 - Lower ball joints only 98+
Greasable, fits DS and PS
(MOOG K8695T) : For lower ball joints?
#17
06-06-2008
Ok so I'll need to order:
1 - DS one-piece UCA 98~2006:
(MOOG K8708T): For Driver side?
Or will this fit DS & PS?
1 - PS one-piece UCA 2003 1/2~2006:
(MOOG K80068) : For Passenger Side?
Or will this fit DS & PS?
2 - Lower ball joints only 98+
Greasable, fits DS and PS
(MOOG K8695T) : For lower ball joints?
1 - DS one-piece UCA 98~2006:
(MOOG K8708T): For Driver side?
Or will this fit DS & PS?
1 - PS one-piece UCA 2003 1/2~2006:
(MOOG K80068) : For Passenger Side?
Or will this fit DS & PS?
2 - Lower ball joints only 98+
Greasable, fits DS and PS
(MOOG K8695T) : For lower ball joints?
#18
06-06-2008
Ok so I'll need to order:
1 - DS one-piece UCA 98~2006:
(MOOG K8708T): For Driver side?
Or will this fit DS & PS?
1 - PS one-piece UCA 2003 1/2~2006:
(MOOG K80068) : For Passenger Side?
Or will this fit DS & PS?
2 - Lower ball joints only 98+
Greasable, fits DS and PS
(MOOG K8695T) : For lower ball joints?
1 - DS one-piece UCA 98~2006:
(MOOG K8708T): For Driver side?
Or will this fit DS & PS?
1 - PS one-piece UCA 2003 1/2~2006:
(MOOG K80068) : For Passenger Side?
Or will this fit DS & PS?
2 - Lower ball joints only 98+
Greasable, fits DS and PS
(MOOG K8695T) : For lower ball joints?
1 MOOG K80068 PS upper arm
2 MOOG K8695T lower ball joint - same DS and PS
If you want to also change to greasable tie rod ends, they are the same DS and PS: MOOG ES3461
To replace the lowers, some chain auto parts stores offer a free tool loan program. Just leave them a refundable deposit for the ball joint tool, probably around $100.
#20
06-07-2008
i went and bought the one from harbor freight... its cheap and Chinese but its the same as the one that you rent and it was only $30
Thread
Thread Starter
Forum
Replies
Last Post
