part # for factory 2.5" rear lift blocks? Or sell me yours? ;) - Ford Ranger Forums

Roddy · 06-09-2008

Ok so i'm trying to sort out this whole "2008 4x4's sitting lower than other years" issue, so that i can run some meaty tires.

I'd like to replace my stock 1.25" rear block with the factory 2.5" block found on 07 and older models. .. but the dealers i have talked to cant find a part number, and i havent come up with anything online myself.

Does anyone know the parts number? or have a set with the U-bolts that they might want to send my way for $$$

LMK

EdGe_wannabe · 06-09-2008

PM HighRollerII, I think he has some!

Brenton

5speedin2.3 · 06-09-2008

go to a junkyard, they should have some.

as far as u-bolts, i would just buy new ones, any spring/axle shop should be able to make some.

Blackhawk · 06-10-2008

i'll trade ya new leaf spring bushings for the my blocks.

HighRollerII · 06-10-2008

ive got blocks thanks brenton you probably saw them in my room the other week lol

ManEHawke · 06-10-2008

Minor hijack to minimize duplicate threads.

You guys know if these will work on my 31 spline rear-end
http://store.summitracing.com/partde...5&autoview=sku

Its for an F150, but it has 3.25 width which should work. It shouldn't be too bad to run w/o the bumpstops right. Mainly light to medium offroading, and no more than 1500 payload when carrying stuff.
thanks guys

Let me know if that kit is crap, and if you can lead to some better stuff if available.

Roddy · 06-11-2008

i wouldnt get those, go look at your stock ones... and notice how those blocks and your blocks are different