SWAY BARS!!!
#1
#3
There are the pics after it's installed. There are two different sized bolts... Lots of washers. Make sure you put everything back on as it was.
I will pass down the info my bro gave me when installing mine. Disconnect the side links from the main bar, install them FIRST. Then install the main bar, and link it up to your diff.
When I put mine on, I thought it wasn't going to fit at first. Turns out that one side clamps over the flange of the diff cover, the other does not.
And the connecting bars attach outside the frame, and bend inward.
Oh yeah and the one on the left side of the truck will rub your ebrake cable a bit. *Shrug*
That help?
#6
My 98 ranger came with a rear sway bar from the factory, and it was useless. You couldn't tell any difference with it on off, loaded or unloaded. I disconnected it and left it that way, though I should have sold it I guess.
The quick discos must get old. I had some like that on the rear sway bar on the sport trac and they were noisy. Again it stayed disconnect all the time.
The quick discos must get old. I had some like that on the rear sway bar on the sport trac and they were noisy. Again it stayed disconnect all the time.
#9
#18
#21
oopsies....not rear sway bar for me....I want a 1" for my little brother!! He's got two 3/4" ones from BII's....been looking everywhere for a 1" for his.
Front bar is going back on when we have this little PNW meet...the RCD links are being delivered to me.
Alan....Can you do what the 98+ 2wd guys can do? Use a 98+ 4x4 front sway bar? It's a good 1/4" bigger than the stock 98 2wd bar. Just a thought...maybe a '97 4x4 front bar? IDK...something to think about.
Front bar is going back on when we have this little PNW meet...the RCD links are being delivered to me.
Alan....Can you do what the 98+ 2wd guys can do? Use a 98+ 4x4 front sway bar? It's a good 1/4" bigger than the stock 98 2wd bar. Just a thought...maybe a '97 4x4 front bar? IDK...something to think about.