replacing inner tie rods on Ford Ranger
#1
replacing inner tie rods on Ford Ranger
1999 Ford Ranger, 3.0 liter V6, 2 wheel drive, coil spring front suspension.
I plan on replacing the inner tie rods on my Ranger. My question is: Do I have to remove the steering rack, as my Ford factory manual states to change the inner tie rods? It looks to me as if I remove the outer tie rod ends and the boots (bellows) I would have enough room to unscrew the inner tie rods while the rack is still on the truck. Thanks, billj
I plan on replacing the inner tie rods on my Ranger. My question is: Do I have to remove the steering rack, as my Ford factory manual states to change the inner tie rods? It looks to me as if I remove the outer tie rod ends and the boots (bellows) I would have enough room to unscrew the inner tie rods while the rack is still on the truck. Thanks, billj
#5
Originally Posted by yellow rhino
Ya im in this situation also but i need new ones first. Anyone know of any heavy duty aftermarket kits (That wont break ever)
within the next few weeks i will be converting my inner tie rods to use heims. If i can safely do this to my truck i will be making more and sellign them, but for now another option is camburg's heimed steering.
look at camburg.com
#9
Thread
Thread Starter
Forum
Replies
Last Post