SO bigger really IS better? f250 pics inside
#76
Member
iTrader: (2)
Join Date: Oct 2007
Location: Corvallis, OR/Seattle, WA
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
you are dense aren't you? if theres so much snow in calgary youd think you would know how to drive in it and avoid crashing into beamers or getting stuck on 1 ft tall snow piles...
#77
You need some new material other than the upside down stuff, you don't know why it was upside down and you never will. I think you just constantly talk about being upside down because when you and your boyfriend 69 standing up, you're the upside down one.
#79
you say i need new material, but yet you have used gay jokes (so insiteful) how many times?
#80
this thread was full of fail drama from the minute it started, I'm not really making it any worse. If anything YOU'RE the one starting unnecessary drama.
Last edited by 99ranger4x4; 02-16-2010 at 12:03 AM.
#81
rofl, you're a jackass. the Hummer is an inside joke with me and some of my good friends on here. get over it, you're not the first person to call me out on that and I'm sure you wont be the last.
this thread was full of fail drama from the minute it started, I'm not really making it any worse. If anything YOU'RE the one starting unnecessary drama.
this thread was full of fail drama from the minute it started, I'm not really making it any worse. If anything YOU'RE the one starting unnecessary drama.
no need, we all know what a truck looks like roasting the inside tire around a turn.
and I love how you call us the dick suckers when you provoked all of it you ****in ****. I think you're the dick sucker, just pissed off because you got called out on your buddies truck not being all that badass.
and I love how you call us the dick suckers when you provoked all of it you ****in ****. I think you're the dick sucker, just pissed off because you got called out on your buddies truck not being all that badass.
#84
Truck wouldn't be bad if it were a diesel, had new tires that weren't Baja Claws, and had that front axle cut and turned to be able to have 4wd again. I do like his front spring hangar, and don't like the size of the shackle it's running up front.
SAS for lift? It comes factory with a SFA. There was no SWAP needed for this suspension setup. You need to research before you post.
Sounds like you need to spend some time listening to your own words dude.
It's ok matt, I got your back like a Jansport. lol
Sounds like you need to spend some time listening to your own words dude.
It's ok matt, I got your back like a Jansport. lol
#86
Sounds like you need to spend some time listening to your own words dude.
#88
yes i realize that, but compare a 4x4 with no front drive shaft, to a 4x4 with a disengaged t-case and hubs, it's 2wd, what makes the big difference? it's not like it takes hours to put a driveshaft in... on a truck that height, i could probably do it in literally 5 minutes, it's what, 8 bolts?
#89
ROFL.....this thread made me laugh...and in my truck if i rev it up to 5 grand and dump the clutch..the clutch grabs and slows the motor down and i take off...it will not spin the tires unless its wet out...then it will
#90
yes i realize that, but compare a 4x4 with no front drive shaft, to a 4x4 with a disengaged t-case and hubs, it's 2wd, what makes the big difference? it's not like it takes hours to put a driveshaft in... on a truck that height, i could probably do it in literally 5 minutes, it's what, 8 bolts?
#95
Weezl, you bring to this thread nothing constructive other than bashing and not knowing what you're saying. If he wanted everyone to hate on him, he would have asked everyone to in his original post. And if you go back and read it, he's not asking for it. Just sharing.
That's why I was sayin cut and turn the axle and have a shaft made. It wouldn't be that hard. Probably more money than he wants to spend, but at least his pinion angle wouldn't eat drivelines like rust eats downey's truck. lol
The point is that the guy probably doesn't have a driveshaft that will work in that truck. The angle on the pinion would be ridiculously severe and the shaft wouldn't last 5 minutes. Thats why most of these insanely huge trucks do not have a front shaft in them. It would be a ton of work to get a working shaft in there correctly and the people who own these types of trucks don't wheel em anyways so they don't mess with turning the C's and having a custom front shaft made.
#98
rofl, you're a jackass. the Hummer is an inside joke with me and some of my good friends on here. get over it, you're not the first person to call me out on that and I'm sure you wont be the last.
this thread was full of fail drama from the minute it started, I'm not really making it any worse. If anything YOU'RE the one starting unnecessary drama.
this thread was full of fail drama from the minute it started, I'm not really making it any worse. If anything YOU'RE the one starting unnecessary drama.
#100
ok...i know i'm late on this one, but you say that picture is gay despite the insanely hot chick standing in front of a hummer that can be allowed to be pink for fact of being that badass....quit acting so butthurt man