Not sure what forum to put this in, but wheels are part of the suspension I guess. Will 33"x12.5x15 fit on my stock ranger rim? And far as fitting on the truck will I need to do "spacing" which I believe is pushing the tires out to move away from side of frame so they don't rub?

Thanks for the help

 

https://www.ranger-forums.com/forum2...ad.php?t=19091

do a search next time i seached "33 stock" this is a thread i resonded too and it was about oh half way to 3/4 way down the first search page should answer your questions..

do yourself a favor if you have to run it like that only do it for a while get new 15x8 rims..

 

are you planning on lifting?

 

^^ yes...that is a smart idea to get better clearness..

 

Its kinda hard to see in his SIG but he is already.

Mazda B3000, 99', Flowmaster side exit (passenger,dual tip), 3" spindle & 3" bocks, stock tires for now...........

 

good piont there bill bob ****** ***** lol...

 

you can run 33s on stock wheels with no problems that i have ran into and i had wheeled my truck very hard with 33s and stock wheels, BUT the center of the tread is going to wear out ALOT faster than if you had a wider wheel. id plan on getting new wheels if you are going to spend cash on the tires otherwise they are gonna wear out alot faster

 

You said 15x8 rim, would that work better than a 15x10. I am getting bfgoodrich 33" mud km's if that helps and what kind of backspacing do you recomend? Thanks again.

 

I've read that a 8" wide wheel seems to work well with a 12.5 tire. I would recomend anywhere from 3.25" b/s to 4"

 

33's on 15x10's look like a square. I have 38's on 15x8's.

 

do 15x10 it looks cool

 

I think I might do a 35" with a added body lift, will I have the clearance with a spindle,c arm and BL?

 

after 15x10 and body lift you can fit the 35's easy