Superlift will not fit.
#1
Superlift will not fit.
Hey i am currently putting in a lift kit from superlift in my ranger. Front went in fine other then i got 2 driver side torsion bar brackets, and the u-bolts in the back are to short. They just come above the plate. Am i supposed to stack the blocks or not. also when i put them on the axle they bend out. It is almost like they are not wide enough. Can someone please help.
Cheers
Chris
Cheers
Chris
#3
#13
Get some Skyjacker leaf springs. not as cheap as an AAL, but I think they ride much nicer. Stacking blocks on the rear axle sucks...
Skyjacker Leaf Spring, Skyjacker Softride Rear Lifting Leaf Springs
I am running the 4" lift springs and the stock block. if you get the 6" lift leafs, you can take the stock blocks off all together and net 4" of lift.
Skyjacker Leaf Spring, Skyjacker Softride Rear Lifting Leaf Springs
I am running the 4" lift springs and the stock block. if you get the 6" lift leafs, you can take the stock blocks off all together and net 4" of lift.
#14
#15
#16
#17
Skyjacker FR34 for the 4" leafs (leave the stock block on the axle to get 4" of lift).
Skyjacker FR56 for the 6" leafs (take the blocks off, nets 4" of lift)
#18
#20
Ya i am trying to find a place that is open on the weekend that has the right length U-bolts but every place that has them are way way to small. And the ones that I can find are for a trailer with square tubing. I am still waiting for the 4wd shop to call me back and see if they have the right length U-bolts. I told them I don't care if they are too long, i can cut them down if they are but I just need the U-bolts to fit.
#22
Member
iTrader: (4)
Join Date: Jun 2007
Location: Phoenix, AZ
Posts: 1,462
Likes: 0
Received 0 Likes
on
0 Posts
I have the drop down brackets for the torsion bars... Layin in my garage
These are the AAL im running....
http://www.4wheelparts.com/Lift-Kits...&t_pn=EXP13133
These are the AAL im running....
http://www.4wheelparts.com/Lift-Kits...&t_pn=EXP13133
Thread
Thread Starter
Forum
Replies
Last Post
zabeard
4.0L OHV & SOHC V6 Tech
19
06-29-2007 04:47 PM
blue_bandit
Wheels & Tires Semi-Tech
16
01-23-2006 11:01 AM
fletch12518
Wheels & Tires Semi-Tech
30
01-05-2006 09:57 AM