Finally ordering a lift kit !
#1
Finally ordering a lift kit !
http://4wheelparts.com/4wp/products/...RO&expand=sub2
Definetly want to order that one, anyone know if I can run 33's without MUCH rubbing.
97 and 86-88 Ranger 2wd 5"/3.5" Lift Includes; Radius Arm Drop Brackets, Axle Pivot Drop Brackets, Sway Bar Extensions, Brake Line Kit, Coil Springs, Rear Block Kit, Pitman Arm, 4 ES3000 Shocks
EXPK4122B
Finally got my job situation fixed and been saving extra money forever now so I can get the tires/rims/kit all together.
Also do the put the kit on for free ? I heard the place was in orlando, and if I went there they would do it.
Thanks for answering all my questiongs :)
Definetly want to order that one, anyone know if I can run 33's without MUCH rubbing.
97 and 86-88 Ranger 2wd 5"/3.5" Lift Includes; Radius Arm Drop Brackets, Axle Pivot Drop Brackets, Sway Bar Extensions, Brake Line Kit, Coil Springs, Rear Block Kit, Pitman Arm, 4 ES3000 Shocks
EXPK4122B
Finally got my job situation fixed and been saving extra money forever now so I can get the tires/rims/kit all together.
Also do the put the kit on for free ? I heard the place was in orlando, and if I went there they would do it.
Thanks for answering all my questiongs :)
#4
#12
I must say Zach, you have the prettiest truck on this site
Yes..it will be a very tight fit for your truck, I have a 99 4x4 and I put a 3inch body lift and fit 33s with no rubbing...as close as it comes...I think that, *IF AT ALL*...it will only rub if you crank the wheel as hard as you can since yours is just a little lower (4x2)
Yes..it will be a very tight fit for your truck, I have a 99 4x4 and I put a 3inch body lift and fit 33s with no rubbing...as close as it comes...I think that, *IF AT ALL*...it will only rub if you crank the wheel as hard as you can since yours is just a little lower (4x2)
#13
#18
#19
you will fit the 33x12.5s on it with that lift yes. I would suggest useing a 15x8 rim though instead of the 15x10 rims. it will help keep the tire centered more, with the 15x10 rims it may be out a bit too wide and rub on the fenders or possibly the end of the bumper at turns or stuff. it also may not rub, but if it does then you could always just trim off what it rubs on. but with that lift you can fit 33x12.5s on a 15x8 rim on your 2wd definitly. if it was a 92 or older then id say no, but a 93-97 will definitly fit.
#20
guess i didnt realize they sit lower.
I do no that a 12.5 tire will fit on a 15x8 rime fine tho. I am running that myself. There is like a 1/2 inch on either side of the tire that doesnt touch the ground all the way on street driving, but to me im not worried about that. If you air the tires down low enough it should touch all the way, but i dont want to kill my mpg because of it.
I do no that a 12.5 tire will fit on a 15x8 rime fine tho. I am running that myself. There is like a 1/2 inch on either side of the tire that doesnt touch the ground all the way on street driving, but to me im not worried about that. If you air the tires down low enough it should touch all the way, but i dont want to kill my mpg because of it.
#21
OK first thing first if you have a 98+ ranger and are giving advice in compairing to your truck STOP THAT CRAP NOW.... you must learn your truck suspension is NOTHING like our lovely 93-97. is a odd beast and is quite a biotch in fitting tires.....now that is sayed...lets move on
Nate it sounds like a good idear but dont go with a 15x10 get a 15x8. my concern is more the fender rubbing the bumper/valance rubbing can be fixed in like 10 min its easy but the fender thats a different story.
Erv i could smack you with just 3" of lift on a 93-97 is a complete pain to fit 33's your truck isnt like the 93-97. now you can fit them on a 15x8 with just a body lift and a leveling block its tight as hell but it will fit.
beard the rear should be fine its the front i am more worried about. and the crack about the 32's its cause i am special lol...
thanks
you can run a 33x12.5x15 on a 15x8 its acully the more perfered way of tire-rims with extream offroaders. not a 15x10.....
Originally Posted by Nate97Ranger
33.12.50 with 15.10 rims I meant to add.
Should I save and maybe add a body lift ?
Should I save and maybe add a body lift ?
Originally Posted by rangererv
a 5 inch lift?
Yes, you will clear 33's fine.
You can fit 33x12.5 on a 15x10 with only 3 inches of lift...you will be fine.
Yes, you will clear 33's fine.
You can fit 33x12.5 on a 15x10 with only 3 inches of lift...you will be fine.
Originally Posted by zabeard
rear will prolly rub. you will have to talk to zach(redneckstone) he would know if its gonna rub, he some how fit 32s with a coil spacer and nothing else. lol
Originally Posted by Nate97Ranger
Ahhh, probably shoot him a PM, he's def my fav 3rd gen truck hahah.
Originally Posted by Nate97Ranger
haha damn, Really want the 12.50's otherwise ill go with with the 8's with 10.50 tires.
#22
#23
Originally Posted by Nate97Ranger
Sweeeet. Wicked news to here haha thanks alot guys.
Hopefully Ill have her up by END of march at the latest.
What place sells tires/rims together Online ? I can only find them seperate.
Still dont know if I want Rock Crawlers...or The Eagle Alloys.
Hopefully Ill have her up by END of march at the latest.
What place sells tires/rims together Online ? I can only find them seperate.
Still dont know if I want Rock Crawlers...or The Eagle Alloys.
#24
Thread
Thread Starter
Forum
Replies
Last Post
Wowak
Exterior Semi-Tech
4
11-05-2004 09:41 PM