Strange Popping Sound... Video inside!
#1
Strange Popping Sound... Video inside!
I recently did some work on my '98 2wd. Installed a spindle lift, and also tried to address some problems. It was popping over small bumps and when turning. The popping over bumps ended up being bad ball joints, I replaced all four. I cannot figure out the popping when turning. It's just when you turn the wheel a little back and worth. It doesn't seem to be the tie rod ends. More towards the inner tie rods or the rack and pinion itself. The wheel bearings have also been replaced. I took a small video, it's really dark, but you can hear the noise. Any opinions?
http://s5.photobucket.com/albums/y16...t=100_5040.flv
http://s5.photobucket.com/albums/y16...t=100_5040.flv
#3
Originally Posted by whiteo5xlt
were you turning the wheel back and forth in that video couldnt really tell. and your not moving it could have some thing to do with the rack. its sounds pretty bad lol
#5
Thread
Thread Starter
Forum
Replies
Last Post
Wowak
General Technical & Electrical
0
08-02-2004 09:20 PM