Superlift 4 " kit
Ok guys I am back to working on the truck. I bought something to drive for the winter so I can tear my Ranger apart. I am still looking at the Superlift 4" kit(K358).
I also have the coil over brackets already but not sure If I am going to go that route.
My question is..... the truck is going to be a daily driver. and Never offloaded other than corn fields or woods for firewood. Can I get by with the torsion bars or should I up grade to the coil overs?
Also, I have a 1" body lift in the box yet. And I also have a brand new set of togo M/Ts sitting here. Will the 305/70/16s fit with the 4" suspension lift and 1" body lift(do I even need body lift?). I plan on using stock 7" wheels and a spacer to push them out a little
I have 4.10s new with 32/11.50/15s. How bad is the 305s going to rob the power compared to the 32s?
Also, is the Superlift Front Driveshaft # 9636 a good choice to?
I want do all the suspension mods, then POR15 the frame/body underside and topcoat with chassis black. I just want to do all the suspicion work first not to disturb the new paint. thanks Guys