Torsion bar bolts
Hello, I have searched and found people ask about there drivers side adjustment bolt being in further, but mine is actually the oppisite. The passenger side is in quite a bit further than the drivers side, but the truck appears level and the tire place said the height is the same on both sides, so I was just wondering if anyone elses truck is like this as well. The truck is prekeyd, but the bolts were put back in at the same setting they came out, or very close, so it was like this before the mod. I made sure the adjuster nut plate was seated back in the correct position in the slot in the frame as well. I just thought it was weird that the passenger bolt was in further, rather than the drivers side one due to the extra weight on that side. I don't know if it really even matters as long as the truck sits level on both sides, but I wouldent mind hearing others thoughts about this.
2008 Ranger FX4 - Vista Blue, Extended cab 4-door, 4.0L, auto.
2004 Ranger Edge, Sonic Blue, Regular cab, 3.0L, 5 speed. Many mods.
Last edited by mj550; 11-14-2010 at 07:46 PM.