1997 4x4 ranger splash
#1
1997 4x4 ranger splash
the 1997 4x4 ranger splash that im buying the rearend off of..
but it happens to have a 4-5in suspension lift if anyone is interested in this lift i might be willing to go and recover all the parts off this ranger
the coils it has were red kinda made me think it was a skyjacker it had dual shocks the shocks were spray painted with red boots.. it had dual steering stabalizer well i will be going back to the junk yard tomorrow morning to snap a couple pictures of this ranger and if anyone is interested in anything just let me know
but it happens to have a 4-5in suspension lift if anyone is interested in this lift i might be willing to go and recover all the parts off this ranger
the coils it has were red kinda made me think it was a skyjacker it had dual shocks the shocks were spray painted with red boots.. it had dual steering stabalizer well i will be going back to the junk yard tomorrow morning to snap a couple pictures of this ranger and if anyone is interested in anything just let me know
#3
the rear was blocks i believe but im buying the entire rearend leafs and all
and all it looks as if it has a james duff traction bar on it.. i will bring many pictures tomorrow so if anyone is interested in anything just shoot me a pm on leave a reply here
-sorry if this is in the wrong section wasnt sure if i should have put this in vendor or suspension because im not sure if i will be selling anything yet-
and all it looks as if it has a james duff traction bar on it.. i will bring many pictures tomorrow so if anyone is interested in anything just shoot me a pm on leave a reply here
-sorry if this is in the wrong section wasnt sure if i should have put this in vendor or suspension because im not sure if i will be selling anything yet-
#6
#7
the first three pictures are of the front end of this 1997 splash 4x4 ranger i dont have much money to buy these parts if anyone want them but... no one in mobile alabama will buy this since their is only about 4 lifted rangers around here all are 98+rangers
the last picture is the rearend im buying and it looks to be like james duff traction bars.. can anyone help me kinda identify them.. before i buy this 8.8 rearend
the last picture is the rearend im buying and it looks to be like james duff traction bars.. can anyone help me kinda identify them.. before i buy this 8.8 rearend
#8
[QUOTE=Yessick;1007382]the first three pictures are of the front end of this 1997 splash 4x4 ranger i dont have much money to buy these parts if anyone want them but... no one in mobile alabama will buy this since their is only about 4 lifted rangers around here all are 98+rangers
the last picture is the rearend im buying and it looks to be like james duff traction bars.. can anyone help me kinda identify them.. before i buy this 8.8 rearend
what gear ratio is in it?
the last picture is the rearend im buying and it looks to be like james duff traction bars.. can anyone help me kinda identify them.. before i buy this 8.8 rearend
what gear ratio is in it?
#9
#10
did you pull the cover and make sure everything is good? or see if it might even have a locker in it already.
#11
#13
#14
well the coils and drop brackets would be all you need an you could order new shocks...
you might need some new bushings of some sort ya know nothing that would cost you to much out of your pockets but..
i dont think youd seriously need the dual shock set up though..
someone else already said they have dibs on it lol
when i get around to going back over their tomorrow ill ask for the prices and let you know and we can sort out a deal threw shipping and ect.. im not trying to make money off of this i just think that why waste a perfectly fine lift kit when you or someone else could be sporting it ha
you might need some new bushings of some sort ya know nothing that would cost you to much out of your pockets but..
i dont think youd seriously need the dual shock set up though..
someone else already said they have dibs on it lol
when i get around to going back over their tomorrow ill ask for the prices and let you know and we can sort out a deal threw shipping and ect.. im not trying to make money off of this i just think that why waste a perfectly fine lift kit when you or someone else could be sporting it ha
#15
#16
no that ranger had 35's that were nearly brand new and someone bought the rims and tires for a jeep and they just picked it up with a fork lift and took the tires off and lowerd it back down and its sittign it kind of like sand so it couldnt do much damage to it when i go up their tomorrow ill check everything out
if the brackets are jacked then you could always just get the coils and what ever else isnt messed up
if the brackets are jacked then you could always just get the coils and what ever else isnt messed up
#17
yea, for the front the only things you would need (and the only things you would want from that) are the coils, the drop brackets for the front beams, and the radius arm drop bracket (unless you are running extended radius arms). Some of the other parts are homebuilt and quite scary too, like the swaybar drop there, and the dual shock setup with the factory radius arm... Also those dual steering stabilizers are scary and I'm sure the owner just used them as a band-aid to help the steering that he didnt know how to setup properly.
As for the traction bars in the rear, they are not james duff. I have not seen a company make them like that, so I assume they are custom built, but if they are in good condition and you can still adjust the length properly to fit your suspension then they dont look too bad, just be sure to get the spring plate in the rear (the rear mounts look welded right to the plate) and be sure to the get the front mounting brackets from the front spring hangers and pay attention to where they are mounted on the front hangers.
As for the traction bars in the rear, they are not james duff. I have not seen a company make them like that, so I assume they are custom built, but if they are in good condition and you can still adjust the length properly to fit your suspension then they dont look too bad, just be sure to get the spring plate in the rear (the rear mounts look welded right to the plate) and be sure to the get the front mounting brackets from the front spring hangers and pay attention to where they are mounted on the front hangers.
Thread
Thread Starter
Forum
Replies
Last Post
Dan96
OLD - Ranger Based Vehicles
0
07-26-2014 01:19 PM
twinair
OLD - Ranger Based Vehicles
0
08-07-2013 10:52 AM
damaged
General Technical & Electrical
2
06-19-2011 06:01 PM
eBay / Craigslist Find: 1995 ford ranger splash ext, cab 4x4 5.0 FI V8 auto - $4950
PAShooter
eBay & Craigslist Finds
0
12-12-2010 08:34 AM
1996Ranger4x4SuperCabSTX
General Ford Ranger Discussion
3
07-27-2008 11:48 PM