I am wanting to get a 3" spindle lift but I am wanting to know what size block i need to set in the back because i put a 1" knot in the coilsprings so the front is already lifted in the front 1"? Thanks

 

a what? please tell me its not one of those things that twist into the coil?

 

2 things... what in gods name is a 1" knot in the coils.....

and little more info about the truck like IE: year make model suspension 4x4 2wd chicken rubber ducky something here...

 

well, lets see, watning to do a spindle lift, and already has coil " mods ". my vote goes for 3x3.

 

Sorry about the little info. i told yall. It is a 2007 ford ranger reg. cab 2wd and i call it a knot because i dont really know what the exact name of it is, LOL. My grandpa did it for me because i was wanting to try to level my truck out.

 

any pics? if its the things that just twist into the spring, a level truck using those means, is dangerous. find another way, soon.

 

wow...dude... AAL and shackels rear and take your Knot out idk where you put your Knot but take it out...

 

Alright I will get it taken out. So after i get it taken out and all my suspension is stock after I get the 3" spindle lift in the front, what size block should i get in the back

 

try an AAL first, then add a shackle if need be.

 

you should do a shackle or a leaf spring, but block wise robably a 2 inch with just the 3inch spindle.

 

After i put the lift on it, will i need to make any mods after i get it lifted becuase i want to put 31's on it after im finished

 

you can fit 32's after that

 

Would it make a difference if i got the 2" block or the shackle?

 

blocks are less desirable.

 

Well thank you guys for helping me out because i am not good at these things at all, will post pics when i get everything done.

 

I asked my grandpa and what i called "knots" are coil spring spacers but i am going to remove them and i think i am going to do the 3 inch spindle and the 2in add-a-leaf, do yall think my truck would look pretty level after that?

 

you will want a shackle too

 

get some pics of this first... if its just a spacer underneath or above the spring its fine.. but if its in between the coils um no...

 

My problem is all I can get is either the 2" block or the 2" leaf, i cant find any shackles for my truck, would i have any problems with the leafs or the blocks? And where could i find shackles for my truck?

 

belltech 6400/ground force 91143 shackles are what you need.

are you referring to the add a leaf as the 2" leaf?

 

you want full size chevy belltech shackles

 

so all i need to get is the 3 inch spindle lift and the shackles in the back (what size?)?

 

they are 2"

 

what kind of tires do you think would look the best after the lift?

 

big ones