15x10 or 15x8 wheel
#1
15x10 or 15x8 wheel
ok so i have a 2001 edge 4x4 automatic gears 4.10 and i wanted to put 33x12.50 duratracs on it with just a t bar crank and then a body lift until august with that said which rim would be better i like when the tire sticks out a little oh and also i will be puttin front 3' front baja fender and my truck is a stepside so help?
#8
Old Guy User…
iTrader: (12)
Normally I would say 8” but since you are trying to achieve a wider look then maybe the 10”,
I believe that the 8” rim allows a different tire pattern on the ground how much, who know unless you test it out with both rims.
But with a 3.75 or 4” BS, you will not get much outside of an OEM fender let alone the wider Pre-Runner Fenders.
Maybe a wider suspension is in the works somewhere !
I believe that the 8” rim allows a different tire pattern on the ground how much, who know unless you test it out with both rims.
But with a 3.75 or 4” BS, you will not get much outside of an OEM fender let alone the wider Pre-Runner Fenders.
Maybe a wider suspension is in the works somewhere !
#12
#16
#18
I'm in the same boat. Difrent truck. 2x4 4 in lift. I have 15x8 wheels back ordered, but second thoughts are coming in. Future project is 3in body lift for clearance and 33in tires should I cancel my order and try 15x10 so I don't hafto order them later ("saven money") or will that not even fit my truck right now?
#19
i run 33x12.50 bfg a/t with Mickey Thompson classic ll black 15x10 3.31 bs. i like my tires to stick out. when i ran 15x8 even when below 30 psi they wore in the middle like the outside edges were untouched about and inch or so on each side. i wanted my tread to wear evenley too. Although with the 15x8 it seemed to sit a tad higher too.
Thread
Thread Starter
Forum
Replies
Last Post
UmphreysMcBill03
Wheels & Tires Semi-Tech
11
08-07-2006 11:19 PM
jrpro130
Wheels & Tires Semi-Tech
27
05-01-2006 06:15 PM