I just wanted to check with you guys. Is there any issues fitting a set of the FX4 alcoas on a older 2000 ranger 4X4? Does it fit over the hub the same and all the studs line up? Also would I have a problem fitting 32 11.5 15s on them? Thanks

 

here ya go


2000 4x4 with Alcoas with a 32x11.5x15

 

Do you get any rubbing with the 2's on there? I am interested in putting 32s on my 04 level2.

 

josh, you can fit up to 33s on there. The only thing is that you have to go with a 10.50 wide tire (same width as your stock BFG ATs) to avoid rubbing. I'm running 33x10.50x15 BFG Muds on my alcoas. The only rub (which is very minor) that I get is at full lock when making left-hand turns. The rub is on my driver's side front wheel well and it's rubbing only on the plastic wheel well guard, no where else. Of course this is only minor as I'll be installing an RCD lift on the truck soon.

Those also wondering, you can fit 12.50 wide tires on the alcoas. I had a 2nd set of alcoas that had 33x12.50x15 BFG ATs mounted on them. I got the 2nd set of alcoas and the tires from DeviousFred on ORR when he got rid of his truck.

 

I just so happen to know where there is a set of those available. . .

 

I went to discount tire and they said that 33x12.50s wouldnt fit my stock alcoa rims that they might but they'll mess up the drive.. is that true??????????????????????????

 

No, they are retarded.

Brenton

 

I am getting a set of wheels and have a set of alcoas on my 04 fx4. anyone interested in them? let me know want to see what I can get out of the alcoas first. make a offer.

 

Here is my 04 level 2 on 33x12.5R15 with stock alcoas. Rubbed slightly on the sway bar at full lock and turning pretty quick. Otherwise they were ok.