Wheels & Tires Semi-Tech General discussion of wheels and tires for the Ford Ranger.

What tire pressure do you run on Mud Tires?

Thread Tools
 
Search this Thread
 
  #1  
Old 06-14-2006
nated0g's Avatar
Member
Thread Starter
Join Date: Nov 2005
Location: Millington, TN
Posts: 467
Likes: 0
Received 0 Likes on 0 Posts
What tire pressure do you run on Mud Tires?

Just wanting to find what the 'about" airpressure should be with a set of 265's Mud Terrains. stock rims. When i had them installed they didnt lower the pressure after seating the bead and i felt every crack in the road. lowered down to 30psi and went down this small trail i always go down to feel like im a real offroader. it still felt a little stiff so i went down to 28. THEN i went and got my oil changed at wallyworld and the bastards aired them up to 40psi. So again i had to lower it down to 28. they do seem to fatten up between bottom of the rim and the ground.

just wanted to get some input on what yall ran.
 
  #2  
Old 06-14-2006
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
I ran like 32-33 on my 265 mudders
 
  #3  
Old 06-14-2006
Trigger01's Avatar
RF Veteran
iTrader: (2)
Join Date: Oct 2005
Location: Knoxville, TN
Posts: 18,788
Likes: 0
Received 1 Like on 1 Post
Zach, What are you running on your BFG's?
 
  #4  
Old 06-14-2006
rolla_guy72's Avatar
Member
Join Date: Jul 2005
Location: Fairbanks, AK
Posts: 3,256
Likes: 0
Received 0 Likes on 0 Posts
I have 31x1050s and i run the front around 28-30 dpending on how hot it is outside, and the rear about 35.

But offroad.... I've aired them down to 10psi but that was just around my house. I noticed a big, big difference even with an AT, but i haven't aired down offroad, yet... too afraid to break a bead.... but now i have my fullsize spare, and soon I will have an air compressor.
 
  #5  
Old 06-14-2006
rangererv's Avatar
Member
Join Date: Mar 2005
Location: Dearborn Michigan
Posts: 4,376
Likes: 0
Received 1 Like on 1 Post
i run 33 psi on my 33x12.5 bfg's
 
  #6  
Old 06-15-2006
nated0g's Avatar
Member
Thread Starter
Join Date: Nov 2005
Location: Millington, TN
Posts: 467
Likes: 0
Received 0 Likes on 0 Posts
so maybe i need to bump it up some, but even at 30 they seem to ride rougher. i thought the mud terrains were soft compound therefor tought it would be a little smoother over rough surfaces.
i do love when i come to a stop i can feel the ground contact every ****.
 
  #7  
Old 06-15-2006
zabeard's Avatar
who?
iTrader: (8)
Join Date: Nov 2004
Location: IN
Posts: 26,044
Likes: 0
Received 10 Likes on 10 Posts
i would leave it around 28, maybe a little bit more in the front due to more weight.

or better yet. wet down a spot on the pavement, drive the truck through it and on the dry side see if all the tire contacts the pavement. if it doesnt air them down, if they do maybe put some more air in them and try it agian. you will soon find the perfect spot for best contact patch and wear.
 
  #8  
Old 06-15-2006
Cape Fear's Avatar
Member
Join Date: Sep 2005
Location: Charlotte, NC
Posts: 561
Likes: 0
Received 0 Likes on 0 Posts
I'm running 36 front 33 rear. 33x10.5 on a 15x7 load range C. I had to up the psi in the front due to the shoulders showing wear.

There are a lot of factors to take into account, Weight & weight distribution of truck, Width of tire vs width of wheel, load range of tire.

The 265/75/16 BFGs are a load range D. Higher than what is needed for our trucks so they are probably going to ride a little stiff.
 
  #9  
Old 06-15-2006
Cape Fear's Avatar
Member
Join Date: Sep 2005
Location: Charlotte, NC
Posts: 561
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by rolla_guy72
I have 31x1050s and i run the front around 28-30 dpending on how hot it is outside, and the rear about 35.
Why do you run the front lower than the rear?
 
  #10  
Old 06-15-2006
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by Trigger01
Zach, What are you running on your BFG's?
about the same somewhere around 32 I did a calculation back when i was in Calculas about the load range of the tire that holds at max psi deviding that with the load of the truck v.s. 4 tires and it came out to be around 31-33 for my truck
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ShadowRanger08
Wheels & Tires Semi-Tech
48
09-13-2009 03:19 PM
chainfire
Snapshots
20
06-09-2009 08:08 PM
Blackhawk
Wheels & Tires Semi-Tech
4
06-16-2008 08:33 PM
Cooke15
General Technical & Electrical
3
02-26-2008 07:32 AM
rhite95
Wheels & Tires Semi-Tech
9
10-11-2005 10:22 AM



Quick Reply: What tire pressure do you run on Mud Tires?



All times are GMT -6. The time now is 07:01 PM.